DSP, Micros & Memory


DSCs for digital power and lighting

14 November 2012 DSP, Micros & Memory

Microchip’s new dsPIC33FJ09GS302 family of digital signal controllers (DSCs) is designed to enhance efficiency in AC-DC and DC-DC power supplies, HID and LED lighting, solar inverters and other power-conversion applications.

The five-member product family is optimised for digital power applications via integrated high-speed ADCs, a zero-wait-state signal processing core and flexible high-resolution PWMs. These peripherals are integrated for streamlined interoperation, enabling sub-microsecond digital control loops.

Other key features of this family include on-chip analog comparators with programmable hysteresis and rail-to-rail operation, and an on-chip PMBus address selection current source to reduce external components.

These new DSCs offer the lowest power dissipation of any of the GS family members and are the first available in a 20-pin SSOP package and the even smaller 36-pin VTLA package, which has a 5 x 5 mm footprint.

The new MPLAB Starter Kit for Digital Power allows customers to explore digital power conversion using the dsPIC33 ‘GS’ architecture in popular digital power conversion topologies. The kit includes a buck converter and a boost converter with onboard programmable loads for each, together with an LCD display for voltage, current, temperature and fault conditions.

An onboard debugger/programmer with a USB interface is also included. Microchip has a wide range of reference designs, demonstrating various digital power conversion applications and topologies, such as the recently introduced ‘Platinum-rated 720 W AC-DC’ and the ‘Enhanced Solar Micro-inverter’ reference designs.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...
Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...
Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...
Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...
Highly integrated 24-channel mixed signal IC
EBV Electrolink DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.

Read more...
Lower-power Thread and BLE connectivity
iCorp Technologies DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved