Analogue, Mixed Signal, LSI


Programmable low-pass filter

6 March 2013 Analogue, Mixed Signal, LSI

The HMC1023LP5E is a 6th order, programmable bandwidth, fully calibrated, dual low-pass filter from Hittite. It features programmable 0 or 10 dB gain and supports arbitrary bandwidths from 5 MHz to 72 MHz. When calibrated, the bandwidth is accurate to ±2,5%. A built-in filter bypass option enables wider bandwidths while maintaining programmed gain and common mode control settings. Programmable bias settings enable performance/power dissipation trade-off optimised for each application. Filter calibration is accomplished with any reference clock rate from 20 to 80 MHz. One time programmable memory allows the user to ‘set and forget’ parameters like gain and bandwidth.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SiP supports LTE/NB-IoT and GNSS
RF Design DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.

Read more...
Nordic expands nRF91 series
RF Design DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).

Read more...
LEXI-R10 series cellular module
RF Design Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.

Read more...
LTE-M modules with integrated GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox introduces new LTE-M modules with integrated GNSS to boost industrial connectivity. The SARA-R52 and LEXI-R52 series optimise cost and performance, while eliminating the need for extra components.

Read more...
Marki Microwave introduces Prodigy
RF Design Telecoms, Datacoms, Wireless, IoT
Marki Microwave has introduced a new automated filter design tool called Prodigy, which brings MMIC filter design capability directly to the user.

Read more...
Nordic tech tour
RF Design News
Join the Nordic Tech Tour EMEA, and stay ahead in a rapidly evolving IoT landscape.

Read more...
High-speed PIN diode
Altron Arrow Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.

Read more...
Multiband LTE cellular module with GNSS
RF Design Telecoms, Datacoms, Wireless, IoT
The C10QS from Cavli has integrated GNSS capability which utilises Qualcomm IZat location technology Gen8C Lite and supports multiple satellite navigation systems.

Read more...
2 W MMIC power amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
Mini-Circuits has introduced the PMA5-83-2W+ GaAs MMIC power amplifier capable of delivering 2 W PSAT, with an operating bandwidth from 0,01 to 10 GHz.

Read more...
Precision-engineered stamped metal antennas
RF Design Telecoms, Datacoms, Wireless, IoT
New antennas from Pasternack hold solutions for consumer electronics, IoT, automotive, and industrial applications.

Read more...