Mini-ITX motherboard
20 March 2013
Computer/Embedded Technology
Kontron has unveiled its first embedded ARM-based motherboard in the Mini-ITX form factor (170 x 170 mm). The KTT30/mITX is equipped with NVIDIA’s Tegra 3 super processor and combines enhanced media performance with low power consumption.
With its integrated, low-power GeForce GPU, the ARM Cortex-A9 900 MHz quad-core processor board offers impressive 3D graphic performance and delivers total energy consumption of just under 7 Watts.
These performance features make the board suitable for a wide spectrum of graphics- and video-oriented embedded applications like thin clients, panel PCs and mini-box PCs, as well as markets such as medical, rail traffic and public safety.
With its height of just 15,2 mm, extremely flat systems can be built and mounted directly onto the back of the monitor and video panels, ie, for HMIs or cost-efficient digital signage players. In addition, the board supports full-HD (1080p) video for both playback and recording purposes, making it relevant for video conferencing systems or security applications.
The KTT30/mITX enables lifelike 3D graphics with dynamic lighting at screen resolutions of up to 2048 x 1536 pixels. It also offers HDMI 1.4a and 24-bit LVDS video interfaces. Thanks to the integrated video encoder and decoder, as well as high-resolution video playback it offers real-time video compression, which can, for example, be supplied via the CSI/DSI camera port.
Peripheral devices can be connected via three USB 2.0 ports and two RS-232 ports. Operating system and application data can be hosted on the bootable eMMC. Two PCIe slots, one of which can also be used as an mSATA port, are available for application-specific extensions. An RJ45 Gigabit Ethernet port and analog audio I/Os round out the feature set.
The motherboard supports Android and Linux.
For more information visit www.kontron.com
Further reading:
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
An industry-first Android 16 smart module solution
RF Design
Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.
Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow
Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.
Read more...
Unleash the next generation of Intel Core power
Vepac Electronics
Computer/Embedded Technology
The EPIC-BTS9 from AAEON, is tailor-made to bring unprecedented performance to smart manufacturing and industrial robotics.
Read more...
QMC series I/O modules for VITA 93 small form factor mezzanine
Rugged Interconnect Technologies
Computer/Embedded Technology
The new line of VITA 93 QMC mezzanine modules, from Acromag, are engineered to meet increasing demands for smaller form factors and more performance.
Read more...
MIKROE celebrates 2000th Click board
Computer/Embedded Technology
MIKROE has launched its 2000th Click board, the RTC 27 Click, designed for low-power real-time clock and calendar functionality, time tracking, alarm event generation, watchdog timing, and timestamp capture.
Read more...
printer friendly version