DEHNconnect SD2 series surge arresters from DEHN are designed as space-saving terminal blocks with a width of only 6 mm.
These terminal blocks with integrated surge protection have a modular disconnection function that allows them to interrupt the signal circuit for maintenance work.
An integrated module ejector disconnects the signal circuit from the terminal equipment. The disconnection module does not have to be removed, but remains in the module slot.
The two-pole surge arrestor is designed to protect signal interfaces of data and information technology systems, and thanks to its spring-loaded connection system, it provides fast and safe conductor connection. The arrestors are ideally suited for use in industrial environments at information technology signal interfaces of automation, measuring and control, as well as bus systems.
With a maximum impulse current carrying capability of up to 20 kA (8/20 μs), DEHNconnect SD2 is ideal for installation in conformance with the lightning protection zone concept at the boundaries from 0B to 2 and higher. Different types of arresters are available and protect two single lines sharing a common reference potential (DCO SD2 ME …) or an unearthed pair (DCO SD MD …). The ATEX and IECEx-approved arrestor of type DCO SD2 MD EX 24 can be used for intrinsically safe measuring circuits and bus systems.
The devices can be easily snapped onto a DIN rail and are automatically earthed via their supporting foot. Moreover, the equipotential bonding system can be connected to terminal equipment by means of the integrated earth terminal. For maintenance work on the installation, the signal circuit can be simply interrupted by removing the integrated plug-in module. Compact in design, DEHNconnect can be used wherever space is restricted.
What’s the big deal with open pin fields? Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...Connectors for energy storage systems Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
Read more...mBend cable assemblies Conical Technologies
Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.
Read more...Configurable DIN rail housings Wiltron Agencies
Interconnection
With PTR HARTMANN’s INS265 design kit, DIN rail housings can be individually configured using a wide range of options.
printer friendly version