Interconnection


Board-to-board compression connectors

7 August 2013 Interconnection

AVX has extended its line of high-reliability board-to-board compression connectors for commercial, medical and harsh industrial applications with the addition of an ultra-low-profile power connector. Featuring gold-plated beryllium copper (BeCu) contacts that are insert-moulded within the insulator for location and mechanical stability, the new 9155-100 Series connectors are capable of supporting a compressed height of just 1,3 mm.

The series has a mechanical endurance rating of 5000 mating cycles and features a sweeping contact design that provides a 0,7 mm Z-axis deflection range, a long contact wipe, and greater than 40 grams of contact force at minimum operating deflection.

Rated for 3 A per contact, 125 V a.c. and a -40°C to +105°C operating temperature range, the connectors support a broad spectrum of applications, including repeatable/pluggable modules and battery packs, low-profile flex circuit to PCB applications, and nearly any application that requires low-profile power, signal or ground shielding.

The 9155-100 series also features 0,4 m selective gold in the mating area for high reliability and is currently available in two- and three-position configurations; however, a single-contact version designed for increased design flexibility and cost effectiveness will soon be available.

For more information contact Robin Scholes, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Designing with PCIe
Spectrum Concepts Editor's Choice Interconnection
PCI Express has become the backbone of modern high-performance systems with each new generation promising higher bandwidth, but that performance comes with a cost.

Read more...
Connectivity solutions for hydrogen technologies
Hiconnex Interconnection
As the production distribution and utilisation of hydrogen continue to scale, connectivity becomes a key enabler for efficient energy transmission, data communication, and system control.

Read more...
Robust single-pole power connectivity
Hiconnex Interconnection
Designed for cable-to-cable and cable-to-equipment use, Radiall’s single-pole power connector support current ratings from 250 A to 750 A and operating voltages up to 1000 V AC or DC.

Read more...
M12 push-pull connectors
IOT Electronics Interconnection
Phoenix Contact’s M12 push-pull connectors with internal locking set a new benchmark for fast, secure, and space-saving connectivity in industrial automation.

Read more...
Versatile outdoor waterproof connectors
Vepac Electronics Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.

Read more...
Comprehensive range of data connectors
IOT Electronics Interconnection
Phoenix Contact’s comprehensive range of data connectors provides reliable connection solutions for modern networked applications across industrial, infrastructure, and commercial environments.

Read more...
Compact inline connector for aerospace
Hiconnex Interconnection
Radiall’s Small Inline Connector series is a fully qualified wire-to-wire solution designed to simplify harness creation, installation, and modification in aerospace applications.

Read more...
Compact hybrid power storage connector
IOT Electronics Interconnection
Phoenix Contact has introduced a new hybrid connector for electrical energy storage systems, designed to combine power, signal, and data transmission in a single, compact interface.

Read more...
MIL-spec connector series
Future Electronics Interconnection
The MIL-HD2 connector series from Amphenol is the company’s next-generation, SOSA-aligned solution engineered to meet the most demanding requirements of modern military embedded systems.

Read more...
DC connectors approved for 2000 V
IOT Electronics Interconnection
Phoneix Contact’s Sunclix DC connectors are now approved for system voltages of up to 2000 V in accordance with TÜV Rheinland’s new test specification, opening the door to higher-voltage PV designs and reduced system costs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved