Verotec has redesigned its flagship Verotec case with an improved structural design that gives increased strength and rigidity without compromising its clean, uncluttered appearance.
It is designed for high-end instrumentation applications, but is equally suitable for applications such as telecommunications, industrial control equipment and desktop computing.
If required, the enclosures can be both IP54 and EMC screened, either factory fitted under the TecServ+ added-value programme or the required gaskets and panels can easily be retrofitted by the customer. The standard case provides a commercial level of RFI attenuation that should prove suitable for most applications, but if a higher level of EMC performance is required, an EMC upgrade kit, consisting of tinned copper fingers and EMC front and rear panels, increases attenuation to 80 dB @ 100 MHz and 50 dB @ 1 GHz.
The enclosures have no visible fixings and are now available in two basic versions: the Verotec case, complete with 19” panel mountings, and the Verotec caseframe assembly, pre-fitted with KM6-II tiebars for directly mounting standard Eurocards.
The Verotec case is available as standard in 1U, 2U, 3U and 6U heights, in 10,5” and 19” widths, with depths of 260, 300 and 400 mm in all sizes. In addition, the 6U 19” case is also available in an extended 500 mm depth. The caseframe version is available in 3U and 6U heights to suit standard Eurocard sizes, in 42HP and 84HP widths and depths of 260, 300 and 400 mm.
As standard, the case is finished in a fine texture epoxy powder coat in light grey RAL7035 or as a two-tone version with the body of the case in RAL7035 and contrasting corner trims in anthracite, RAL7016.
EEPROMs for industrial and military markets Vepac Electronics
DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.
Read more...Multi-channel downconverter Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Downconverter from Crane Aerospace is a converter that operates from 2 to 18 GHz and delivers a noise figure of 11 dB with an attenuation range of 25 dB.
Read more...Wi-Fi dongle supports 5 GHz band Vepac Electronics
Telecoms, Datacoms, Wireless, IoT
The Edimax IEW-7811UTC is a dual-band 802.11ac USB adapter with a USB 2.0 connectivity that enables network connectivity with high-speed rates of up to 433 Mbps.
Read more...The importance of contrast in fibre-optic sensing Vepac Electronics
Opto-Electronics
Contrast refers to the difference between the light signal that is transmitted through the fibre and the light signal that is received at the other end, and allows for the detection and measurement of small changes in physical parameters.
Read more...RF shield box to 12 GHz Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.
Read more...DC converter for Hi-Rel applications Vepac Electronics
Power Electronics / Power Management
The MFK2812S from Crane Aerospace & Electronics is a DC-DC converter with an input voltage range of 16 to 50 V and an output of 12 V at up to 2,08 A.
Read more...New compact AC-DC PSU series Vepac Electronics
Power Electronics / Power Management
COSEL has announced the expansion of its medical power offering with the addition of the new UMA series, the first three models being the 30 W UMA30F, the 60 W UMA60F and the 120 W UMA120F.
Read more...High visibility 4-digit panel ammeters Electrocomp Express
Enclosures, Racks, Cabinets & Panel Products
The MP-335PAS-1 is a 4-digit 7-segment red display ammeter with a measurement range of 4 to 20 mA and a very low power consumption.
Read more...Multi-channel SMPS cable assemblies RFiber Solutions
Enclosures, Racks, Cabinets & Panel Products
Withwave’s multi-channel SMPS cable assemblies (WMCS Series) provide a wide range of multiple coaxial connectors and flexible cable assemblies with a choice of 26,5, 40, 50 and 67 GHz configurations.
Read more...Building the control panels of the future Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
The industrial automation world is built on robust and efficient control panels that are designed precisely and assembled to manage machines, processes and equipment across different industries.
printer friendly version