Measurement Specialties’ new MS5637-02BA03 is a digital barometric pressure sensor module measuring just 3 x 3x 0,9 mm and requiring only four large pads for operation.
It uses I²C communication and at the highest resolution of 0,016 mBar (equivalent to 13 cm of elevation) its 24-bit delta-sigma ADC produces a pressure accuracy of ±2 mBar at 25°C for pressure ranging from 300 to 1200 mBar and temperature from -20°C to +85°C.
The pressure sensor module also includes temperature measurement capabilities with a temperature accuracy of ±2,0°C and temperature resolution less than 0,01°C. Operating at a low current consumption of 0,6 A (standby <0,15 A) at 1,5 - 3,6 V supply voltage, it boasts a fast conversion time down to 0,5 ms with an oversampling selection available up to 8192.
The MS5637-02BA03 is ideal for high-volume OEM portable or battery-operated devices such as smartphones, tablet PCs and personal navigation devices where size is of primary concern.
Input power bus conditioners Accutronics
Power Electronics / Power Management
The FLHG-60 and the FLHGI-60 are designed to be used as the front-end to the company’s MGDD N input series, to develop full power solutions.
Read more...Hi-Rel DC-DC converter Accutronics
Power Electronics / Power Management
The MGDD-06 series from GAÏA Converter is an ultra-wide input 6 W family of power converter modules, with a permanent input voltage range of 9 to 160 V DC.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...60 W DC-DC FEM for military applications Accutronics
Power Electronics / Power Management
GAIA Converter has launched a fully integrated 60 W DC-DC front-end module that greatly simplifies the design of military power converter architectures.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...250 W DC/DC converter module Accutronics
Power Electronics / Power Management
This high-reliability quarter brick converter, ideal for mission-critical applications, offers a permanent input voltage range of 16 to 75 V DC (up to 80 V DC for 1 s) and a constant output voltage of 28 V DC.
printer friendly version