Performance, flexibility, upgradability are key factors for embedded controller applications. National Semiconductor says its solution for this is CompactRISC - powerful 16 bit RISC controllers with integrated flash memory, A/D converter, CAN interface, multifunction timers, general-purpose I/Os and more. CompactRISC is not a single device but a family that broadens the designers' choice and offers future upgradability. As an example, the CR16MCS9 is the latest device in the family that integrates the CR16 core with 25 MHz, 64 KB flash memory, 3 KB SRAM, 2176 bytes of EEPROM and all the above-mentioned peripherals.
The CR16MCS9 and CR16MCS5 are general-purpose 16 bit microcontrollers based on RISC architecture. The device operates as a complete microcomputer with all system timing, interrupt logic, flash program memory or ROM memory, RAM, EEPROM data memory and I/O ports included on-chip. The CR16MCS9 and CR16MCS5 offer the high performance of a RISC architecture while retaining the advantages of a traditional complex instruction set computer (CISC): compact code, on-chip memory and I/O, and reduced cost. The CPU uses a three-stage instruction pipeline that allows execution of up to one instruction per clock cycle, or up to 25 million instructions per second (MIPS) at a clock rate of 25 MHz. The devices contain a full-CAN class, CAN serial interface for low/high-speed applications with 15 orthogonal message buffers, each supporting standard as well as extended message identifiers.
The CR16 family is ideally suited to a wide range of embedded controller applications because of its high performance, on-chip integrated features and low power consumption resulting in decreased system cost.
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.
Read more...Enhanced code protection for USB µC portfolio Future Electronics
DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.
Read more...General-purpose MCU with RISC-V architecture EBV Electrolink
DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.
Read more...8-bit MCU with I3C support Avnet Silica
DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.
Read more...An evolutionary step in customisable logic Altron Arrow
DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.
Read more...AI-native IoT platform launched EBV Electrolink
AI & ML
These highly-integrated Linux and Android SoCs from Synaptics are optimised for consumer, enterprise, and industrial applications and deliver an ‘out-of-the-box’ edge AI experience.
Read more...MCU for battery-powered applications Altron Arrow
DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.
Read more...Serial SRAM up to 4 MB EBV Electrolink
DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.
Read more...SiP supports LTE/NB-IoT and GNSS RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...Qi2 dsPIC33-based reference design
DSP, Micros & Memory
Powered by a single dsPIC33 Digital Signal Controller, the Qi2 reference design offers efficient control for optimised performance.
printer friendly version