Opto-Electronics


LED driver runs six channels

2 April 2014 Opto-Electronics

STMicroelectronics’ LED7708 is designed to supply several LEDs starting from a single low-voltage rail. It integrates a boost controller, 16 current generators and a four-wire serial interface.

The boost controller regulates the output voltage in an adaptive way, according to the LED requirements, resulting in improved overall efficiency. All the current generators are rated at 40 V, allowing the IC to drive several LEDs in series on each channel. The channels can be run in parallel for higher output current.

The brightness of the LEDs is controlled by the serial interface: a selectable 12-bit or 16-bit greyscale brightness control allows independent PWM on each channel. A programmable on-chip dimming oscillator is provided for external circuitry simplification. The device has dedicated pins to lock to an external synchronisation with other devices (master or slave) for noise reduction in multi-device applications.

The LED7708 implements basic protection (OVP, OCP and thermal shutdown) as well as LED array protection. It can detect and manage open-LED and shorted-LED faults and different fault management options are available in order to cover most application needs.

For more information contact Robin Scholes, Arrow Altech Distribution, +27(0)11 923 9604, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
Connected without limits: An engineering perspective on Altron Arrow’s wireless ecosystem
Altron Arrow Editor's Choice Design Automation
Wireless connectivity is no longer a supporting technology, but rather, a core design consideration that underpins modern electronic systems across industries.

Read more...
Analogue reservoir AI chip capable of real-time learning
Altron Arrow AI & ML
TDK Corporation has jointly developed a prototype of a reservoir AI chip using an analogue electronic circuit that mimics the cerebellum with Hokkaido University.

Read more...
Ultra-low jitter clocks
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Skyworks has introduced a new family of ultra-low jitter programmable clocks designed to meet the increasing demands of next-gen connectivity.

Read more...
Efficient Bluetooth SoC
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The EFR32BG29 wireless SoC from Silicon Labs is a highly efficient, high memory, low-power, and ultra compact SoC designed for secure and high-performance wireless networking for IoT devices.

Read more...
RTOS – The future of embedded systems
Altron Arrow Edge Computing & IIoT
At the heart of the next generation of embedded devices is efficient yet powerful system-level code, often based on an open-source real-time operating system.

Read more...
Reference design for NB-IoT plus GNSS
Altron Arrow Design Automation
ST Microelectronics’ STDES-ST87M01IGN is a reference design for the ST87M01 NB-IoT + GNSS module, implemented on a 2-layer FR4 PCB (90 x 60 x 1,6 mm).

Read more...
Gen5 Pro enhances power conversion
Altron Arrow Power Electronics / Power Management
The Infineon Technologies CoolSET ICE501XD and ICE502XD PWM Fixed Frequency Gen5 Pro controllers are advanced solutions for auxiliary power supplies in demanding high-voltage applications.

Read more...
Compact 6 A automotive buck converter
Altron Arrow Power Electronics / Power Management
Delivering up to 6 A of continuous output current, the DCP0606Y from STMicroelectronics enables efficient regulation of low-voltage rails commonly used in modern vehicle electronics and industrial systems.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved