The new C928 type MEMS microphone from TDK is distinguished by its particularly high signal-to-noise ratio (SNR) of 66 dB(A) in the frequency range between 20 Hz and 20 kHz. It is thus particularly well suited for demanding applications in smartphones. The high SNR significantly improves the audio quality of distant sound sources, for instance when using the speakerphone or recording videos.
In conventional microphones, an improved signal-to-noise ratio usually leads to a sharp rise in non-linear distortions at high sound pressures. Thanks to the innovative design of the C928, a distortion factor of only 1% is produced even at a sound level of 131 dB. That makes it equally suitable for recording extremely loud sound sources.
The microphone features a footprint of 3,35 x 2,5 mm and an insertion height of only 1 mm. Thanks to its symmetrical output, it offers high immunity to interference. Its operating voltage is between 1,6 V and 3,6 V, and its maximum power consumption is 140 μA.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Stainless steel pushbutton enclosures Electrocomp
Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.
Read more...SMD varistors with huge surge current capability Electrocomp
Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Sealed tantalum capacitors Electrocomp
Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...New series of chip-type capacitors Electrocomp
Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...SMD coupled inductors Electrocomp
Passive Components
TDK Corporation has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series.
printer friendly version