RS Components announced the availability of two touchscreen display starter kits for the Raspberry Pi, which provide a quick and easy wiring interface and are ideal for creating portable and low-power Raspberry Pi projects and applications.
The starter kits for the 2,8” uLCD-28PTU-PI and 4,3” uLCD-43PTU-PI modules have been developed by 4D Systems and provide all the components needed for users to connect their Pi to these newly available touchscreen displays and get their projects up and running and ready for programming within a few minutes. These displays feature resistive-touch capability, onboard audio amplifier and speaker, and resolutions of 480 x 272 pixels for the 4,3” and 240 x 320 pixels for the 2,8”.
A unique aspect of the kits is the 4D Pi Adapter Shield, which connects to the serial GPIO port on the Raspberry Pi and to the touchscreen display module via a 5-way cable. The Adapter Shield also replicates the Raspberry Pi GPIO lines and allows users to gain easy access to other Raspberry Pi functions.
Each kit contains a 4D serial Pi Adapter Shield; a 2 GB microSD card; a uUSB-PA5 programming adaptor; a 150 mm 5-way female-female jumper cable for quick connection to another device or a breadboard; a 5-way male-male adaptor to convert the cable to male-female; and a quick-start user guide. A series of ViSi-Genie application software libraries are also available to communicate with the Pi and user code.
High-performance IMU RS South Africa
Analogue, Mixed Signal, LSI
TDK Corporation has announced availability of the new InvenSense SmartMotion ICM-536xx family of high-performance 6-axis IMUs.
Read more...STM32Cube MCU package for STM32WBA
Design Automation
The STM32CubeWBA utility gathers in one single package all generic embedded software components required to develop an application on STM32WBA series microcontrollers.
Read more...Wide frequency range inductors RS South Africa
Passive Components
TDK Corporation has expanded its ADL4524VL series (4,5 x 2,4 x 2,6 mm – L x W x H) of wire-wound inductors for automotive power-over-coax.
Read more...Why LabVIEW is critical to South Africa’s automation future
Design Automation
[Sponsored] In a world increasingly defined by connected systems, edge intelligence, and accelerating automation, the ability to build scalable, responsive, and maintainable engineering applications has never been more essential, and at the heart of this evolution lies LabVIEW.
Read more...High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Take analogue designs from idea to reality
Design Automation
Bringing your analogue design ideas to life is simple with Microchip’s Analog Development Tool Ecosystem, part of its extensive range of solutions for both analogue and digital engineers.
Read more...Accurate power estimation
Design Automation
AMD Power Design Manager 2025.1 is now available – with support for AMD Versal AI Edge and Prime Series Gen 2 SoCs and production support for AMD Spartan UltraScale+ devices.
Read more...AMD Vivado Design Suite 2025.1
Design Automation
AMD Vivado Design Suite 2025.1 is here, and now with support for AMD Spartan UltraScale+ and next-generation Versal devices.
Read more...Automotive power-over-coax inductor RS South Africa
Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.
Read more...3-terminal filters for automotive applications RS South Africa
Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version