The compact and ergonomically designed Iso-Tech ILCM03A and ICM30R clamp meters are designed for making safe and non-intrusive current measurements in a range of applications, at prices approximately 30% cheaper than leading brands, according to distributor RS Components.
The ILCM03A is primarily geared toward current leakage detection, while a key feature of the ICM30R is its ability to make true-RMS AC current readings. Both devices also offer reliable and accurate voltage and resistance measurements as well as continuity testing for circuit breaks.
The ILCM03A is a highly portable device with compact dimensions of only 210 x 62 x 35,6 mm. It also has a single large rotary function-selection switch enabling one-handed measurement and a large backlit 3,75-digit LCD with an analog bar graph, making it a tool that is easy to use and easy to read in any environment. The meter also offers a large-jaw design that enables non-intrusive current measurement on cables and wires that are up to 30 mm in diameter.
The ICM30R integrates dual Hall sensors to provide reliable and accurate current measurements, and provides the true-RMS AC current value of both pure and distorted waveforms. It is also highly portable and easy to use and read, and features a special hand-guard design which provides additional user protection against direct contact with electrical conductors.
Manufactured and tested to international standards, both clamp meters are rated to CAT II 600V and CAT III 300V, according to IEC 61010.
High-temperature closed-loop MEMS?accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...A new class of sampling scope Comtest
Test & Measurement
The PicoScope 9400A Series combines the huge analogue bandwidth of sampling oscilloscopes with the triggering architecture of real-time oscilloscopes.
Read more...Single channel, programmable PSU Electrocomp Express
Test & Measurement
Rohde & Schwarz’ NGC101 is a NGC100-series power supply with a wide range of functions that make them ideal for use in development labs and industrial environments.
Read more...Next-gen LineScan camera Eagle Africa Technology
Test & Measurement
New Imaging Technologies has launched the new LiSaSWIR, its next-generation SWIR LineScan camera and sensor.
Read more...Ultra-portable spectrum analyser Vepac Electronics
Test & Measurement
The PXN-400Z from Harogic is a handheld spectrum analyser covering a frequency range of 9 kHz to 40 GHz with a 100 MHz analysis bandwidth.
Read more...Why your next oscilloscope should be PC-based Comtest
Test & Measurement
For decades, traditional benchtop oscilloscopes have been a cornerstone of engineering, offering reliability, precision, and familiarity. However, as technology evolves, so do the tools we rely on.
Read more...Versatile 3-in-1 instrument Vepac Electronics
Test & Measurement
The ARB Rider AWG-2000 is the cost-effective and powerful two or four channel arbitrary function generator and two or four channel arbitrary waveform generator with advanced sequencer functionality.
Read more...Automotive power-over-coax inductor RS South Africa
Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.
Read more...3-terminal filters for automotive applications RS South Africa
Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.
Read more...Industrial Ethernet time sensitive networking switch RS South Africa
Telecoms, Datacoms, Wireless, IoT
The ADIN3310 and ADIN6310 are 3-port and 6-port Gigabit Ethernet time sensitive networking (TSN) switches with integrated security primarily designed for industrial Ethernet applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version