Eight-channel high-side switch

25 February 2015 Power Electronics / Power Management

The MAX14900E from Maxim Integrated is an octal power switch that features per-channel configuration for high-side or push-pull operation. Fast load switching with low propagation delay makes the device suitable for high-speed PLC systems, high-density digital output modules, motor controllers and PWM/PPO control.

Each high-side switch sources 850 mA continuous current with a low 165 mΩ on-resistance at 500 mA and 125°C. These switches feature 2 μs (maximum) input-to-output propagation delay when driving resistive loads. Long cables can be driven with switching rates of up to 100 kHz for PWM/PPO control in push-pull operation. Multiple high-side switches can be connected in parallel to achieve higher drive currents.

The IC is configured, monitored and driven by an SPI and/or parallel interface. In parallel mode, eight logic inputs directly control the outputs and the serial interface can be used for configuration/monitoring. Serial mode utilises the serial interface for both setting and configuration, and features CRC error detection to ensure robust SPI communication. The device features a global diagnostics output as well as per-channel diagnostics and monitoring through the serial interface.

The MAX14900E features a wide supply input range of 10 V to 36 V, with current limiting and per-channel thermal shutdown protecting each switch/driver. It is available in a thermally enhanced 48-pin (7 x 7 mm), side-wettable flank QFN-EP or standard 48-pin TQFN-EP package, and is specified over the -40°C to +125°C temperature range.

For more information contact Arnold Perumal, Avnet Kopp, +27 (0)11 319 8600, [email protected], www.avnet.co.za

Further reading:

ABB’s Mission to Zero drives South Africa’s energy transition
ABB Electrification Products Power Electronics / Power Management
ABB Electrification is charting a bold path towards a net-zero future with its Mission to Zero programme, a blueprint that combines energy efficiency, electrification, and digital innovation to accelerate the transition to clean energy.

Read more...

---

Energy harvesting using a battery-less IoT system
NuVision Electronics Editor's Choice Power Electronics / Power Management
Energy Harvesting plays an essential role in the foundation of ambient IoT, a new generation of ultra-low power connected devices that operate by drawing energy from their environment instead of relying on traditional batteries.

Read more...

---

Driving power, defining performance
Future Electronics Power Electronics / Power Management
Vishay’s portfolio of inductors, current sense resistors, and MOSFETs provides a comprehensive solution for intelligent power management.

Read more...

---

Battery simulator module simplifies BMS testing
Test Dynamics Power Electronics / Power Management
The PXI/PXIe solution from Pickering Interfaces offers a scalable, modular design for faster development cycles, lower total cost of ownership, and improved safety.

Read more...

---

DC PSU: The cornerstone for efficient solar-storage systems
Vepac Electronics Power Electronics / Power Management
PV energy storage systems are evolving and DC power supplies, with their technical characteristics that are naturally compatible with new energy, have become a key carrier for improving system energy efficiency.

Read more...

---

Why local manufacturing, maintenance and support are key to the success of South Africa’s energy future
Power Electronics / Power Management
Although new renewable generation capacity is being developed, the current transmission infrastructure may not fully support the connection of these sources to the national grid or adequately deliver power to areas of high demand.

Read more...

---

Converter power modules for 48 V networks
Altron Arrow Power Electronics / Power Management
The economic and quality-of-life benefits of electrification is driving the adoption of HV to 48 V DC-DC conversion across many markets with 48 V power modules becoming more common.

Read more...

---

The importance of power integrity
Spectrum Concepts Power Electronics / Power Management
[Sponsored] Behind every high-speed system lies the need for power integrity. Without it, even the cleanest signal paths become compromised.

Read more...

---

Precise multi-vital sign monitoring
Future Electronics Power Electronics / Power Management
The AS7058 by ams OSRAM is an integrated multi-vital sign monitoring device, which provides a complete photoplethysmogram, electrocardiogram, body impedance sensor, and electrodermal activity sensor.

Read more...

---

Automotive battery diagnostics tester
Comtest Power Electronics / Power Management
Midtronics’ MVT handheld battery tester is a revolutionary tool, powered by MDX-AI, which is set to redefine the standards of battery diagnostics and testing in the automotive industry.

Read more...

---