A new series of discrete right-angle pins is available from Mill-Max in four different diameters and is suitable for plugging into receptacles and/or soldering into printed circuit boards. The four standard diameters available in the 37XX-0 series are 0,51 mm, 0,63 mm, 0,76 mm and 1,02 mm. These sizes are useful in satisfying a range of requirements for strength, pitch, board hole size and current carrying capacity.
The parts are suitable for any situation where a right-angle connection is required. They can be soldered on to a daughter card and plugged into receptacles or connectors on a mother board for perpendicular board mating.
They can also be combined with right-angle receptacles or connectors to mate boards in parallel (daisy chaining).
These brass pins are precision-machined and bent and are closely monitored to produce pins with consistent bends each time. The tips of the pins have a full radius shape making them easy to plug into board holes or receptacles. The standard plating options are 200 micro inches pure tin, matte finish over nickel or 10 micro inches gold over nickel; other plating options are available upon request.
What’s the big deal with open pin fields? Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...Halo mid-board optical transceiver Spectrum Concepts
Opto-Electronics
The Samtec Halo mid-board transceiver has been designed for next-generation embedded applications that require 56 and 112 Gbps PAM4 performance in low profile and ruggedised form factors.
Read more...Innovation in high-frequency cable design Spectrum Concepts
Telecoms, Datacoms, Wireless, IoT
[Sponsored] With frequencies approaching 110 GHz, a mismatch in impedance, an increase in insertion loss, or minute phase distortion can be the difference between success and failure.
Read more...New connector for Push-X technology Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.
Read more...Test cable designed for maximum ruggedness Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...Safe connection under load Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.
Read more...Connectors for energy storage systems Phoenix Contact
Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.
printer friendly version