4 November 2015Manufacturing / Production Technology, Hardware & Services
Electrolube will use the pending productronica expo in Munich as a platform to showcase enhancements to two of its most successful thermal management products to provide superior properties across a greater range of applications.
TCORP – Thermally Conductive RTV Plus TCORP is a superior version of the company’s TCOR single-component, low-odour, room temperature vulcanisation (RTV) silicone, which cures upon exposure to atmospheric moisture (oxime-cure). The thermal conductivity of the new formulation has been increased from
1,8 W/m.K (TCOR) to 2,20 W/m.K (TCORP).
TCORP is ideal for gap filling around components and power resistors to dissipate excess heat via heatsinks, and is very effective at preventing overheating and premature component failures. It is a multi-use product, as it can be used both as a sealant or gasketing compound, as well as a low bond strength thermal adhesive.
TCORP has a wide operating temperature range (-50°C to +230°C), making it a suitable contender for harsh automotive under-hood applications. It is an ideal solution when thermal conductivity is a critical requirement for an application.
SCTP – Surface-Cure Thermal Paste
SCTP is a highly effective and efficient thermal interface material, designed to fill gaps that naturally exist between two metal surfaces placed one upon the other, dramatically improving the effective range of surface area for heat transfer.
One of the key properties of SCTP is that it does not set, remaining malleable when rework of components is required. The product is specifically designed to resist pump-out of the thermal interface layer from the bond line, ensuring minimal degradation of effective heat dissipation. It is especially suited to applications that are exposed to rapid and frequent changes in temperature, as such conditions are known to exaggerate the pump-out effect of standard thermal pastes. SCTP also has excellent thermal stability, resisting up to 200°C.
While the material can be applied using conventional industrial dispensing equipment, it can also be applied via screen/stencil printing directly onto the contact surfaces. In addition, SCTP does not contain any solvents and due to its ease of application, it is possible to apply very thin films, thus minimising the effects of thermal resistance at the interface and offering much greater stability over the lifetime of the device when compared to conventional heat transfer systems.
Filling high-end PCB manufacturing gaps to accelerate the AI electronics growth PCBWay
Manufacturing / Production Technology, Hardware & Services
[Sponsored] In the digital era, AI and big data technologies are developing at a rapid pace. PCBWay is continuously advancing its PCB manufacturing technology to support the growth.
Read more...Microtronix revives defunct cell phone plant Microtronix Manufacturing
Editor's Choice Manufacturing / Production Technology, Hardware & Services
In a significant move for South Africa’s struggling electronics manufacturing sector, local technology firm Microtronix has breathed new life into a formerly defunct cell phone manufacturing facility.
Read more...Manufacturing with purpose Production Logix
Manufacturing / Production Technology, Hardware & Services
How Production Logix is setting a new benchmark for high-reliability, locally manufactured electronics.
Read more...Recent purchase of Seica Flying Probe tester ZETECH ONE
Manufacturing / Production Technology, Hardware & Services
Zetech One recently supplied a Seica Flying Probe tester to Etion Create for use in the development and manufacture of its electronic solutions.
Read more...Compact but powerful soldering system Truth Electronic Manufacturing
Manufacturing / Production Technology, Hardware & Services
The Economy SIG is EPM’s compact wave soldering solution, designed to bring professional-grade soldering capabilities to small and medium-scale electronics producers.
Read more...In-circuit testing vs functional testing MyKay Tronics
Manufacturing / Production Technology, Hardware & Services
Achieving zero defects in printed circuit board assemblies (PCBAs) demands rigorous validation on both the component level and system level.
Read more...Select coat ultrasonic cleaning station Techmet
Manufacturing / Production Technology, Hardware & Services
Nordson Electronics Solutions has announced their latest technology innovation for conformal coating systems, the ASYMTEK Select Coat SL-1040 Ultrasonic Cleaning Station.
Read more...How smart components drive sustainable industrial efficiency TRX Electronics
Editor's Choice Manufacturing / Production Technology, Hardware & Services
Manufacturing industries across South Africa face mounting pressure to reduce operational costs whilst meeting increasingly stringent environmental regulations, and the path to achieving these goals lies in embracing advanced electronic components that enable smarter, more efficient industrial operations.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version