Computer/Embedded Technology


Kickstarter campaign for Arduino UNO board

25 November 2015 Computer/Embedded Technology

The UNO R3 is the staple of most Arduino-based projects but it’s been around for a number of years and many of the features have been improved, for example by Adafruit and Sparkfun which make excellent enhanced UNO compatibles. However, FTDI’s additional requirements for a full 1 A current without excess heat dissipation and FCC/CE conformity led the company to consider a new third-party UNO compatible reference design that met these requirements; hence the inspiration behind NerO.

NerO was initially developed as an accessory for another project, but FTDI then decided to make boards available to interested customers at a promotional price, leading to the inception of the KickStarter project. On launch the company will make the NerO schematic and PCB design files available publicly as a reference design under OSHWA (Open Source Hardware Association) terms.

General specifications for the board are:

• 16 MHz ATMega328 MCU with Optiboot bootloader.

• Input voltage: 7 V to 20 V (9 V or 12 V recommended).

• UNO R3 form factor.

• 14 digital I/O pins (6 PWM outputs).

• 6 analogi.

• FTDI FT231XS USB UART interface.

For more information contact Fernando Da Silva, Electrocomp, +27 (0)11 458 9000, [email protected], www.electrocomp.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Low-profile tantalum chip capacitors
Electrocomp Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.

Read more...
Compact high-performance antennas
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
Track with precision
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX provides innovative antennas for cellular, LTE-M, NB-IoT, LoRa, GNSS, BLE, UWB, Wi-Fi, and future Satellite IoT.

Read more...
RGBIR sensor with I2C interface
Electrocomp Opto-Electronics
Available in a miniature opaque 2,67 x 2,45 mm package, Vishay’s VEML6046X00 includes high-sensitivity photodiodes, a low noise amplifier, and a 16-bit analogue to digital converter.

Read more...
Thick film power resistors
Electrocomp Passive Components
Vishay has released a new product to the market, its thick film power resistor, which is offered in a clip-mount TO-247 package.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...
HiRel components from Kyocera AVX
Electrocomp Passive Components
Kyocera AVX Corporation is a leading supplier of advanced components and interconnect solutions, offering a broad selection of passive components and connectors.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved