A 'tiny' 650 kHz, rail-to-rail output, operational amplifier that operates down to 2,7 V supply while consuming only 4,6 µA is being offered by Micrel Semiconductor.
The MIC861 operates from 5 down to 2,7 V and provides a -3 dB bandwidth of 650 and a 400 kHz gain-bandwidth product, yet consumes only 4,6 µA supply current. Traditional op-amps at this speed consume more than 50 µA, and many consume much more. Packaging is also much smaller; Micrel's Teeny SC70-5 packaging is approximately one-half the size of SOT23-5 packaging.
The MIC861 is unity gain stable. It is specified at supply voltages of 2,7 and 5 V. Input offset voltage is 2 mV (typical), large signal voltage gain is 83 dB, PSRR is 85 dB and CMRR is 80 dB.
High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...Combining a LPF and ADC driver for a 20 Vp-p signal Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...Pressure sensor with NextNav certification EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...Multi-zone distance sensor with 90° field of view Avnet Silica
Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.
Read more...Six-axis IMU with Qvar sensing channel Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV16X from STMicroelectronics is a high-performance, low-power six-axis IMU, featuring a three-axis digital accelerometer and a three-axis digital gyroscope.
Read more...Bidirectional current-sense amplifier with PWM RS South Africa
Analogue, Mixed Signal, LSI
The MAX49925 from Analogue Devices is a bidirectional current-sense amplifier (CSA) with an input common-mode range that extends from -40 to 76 V, making it suitable for 48 V HEV applications where there are large automotive transients.
printer friendly version