Linear Technology introduced the LTC2876 and LTC2877, exceptionally rugged, high-voltage tolerant RS-485 transceivers targeted for Profibus-DP (decentralised periphery) master and slave devices.
As with any fieldbus, Profibus-DP systems are prone to installation cross-wiring faults, ground voltage faults or surge, which can cause catastrophic over-voltage conditions that exceed the absolute maximum ratings of typical transceivers. Whether transmitting, receiving, in standby or powered off, the LTC2876 and LTC2877 tolerate ±60 V on their bus pins, eliminating common damage due to transmission line faults.
The devices provide multiple levels of protection that make them suitable for a variety of applications, including discrete manufacturing and process automation. An extended ±25 V input common-mode range and full failsafe operation improve data communications reliability in electrically noisy environments and in the presence of ground loop voltages, which would otherwise cause data errors and possible device damage.
Their incredibly high ESD protection guarantees the LTC2876 and LTC2877 can withstand ±52 kV HBM on the transceiver pins without latchup or damage; all other pins are protected to ±15 kV HBM. Fully symmetric receiver thresholds ensure the devices maintain good duty cycle symmetry at low signal levels and boost receiver noise immunity, while supporting full failsafe operation. Both devices are tested with Profibus IEC 61158-2 and TIA/EIA-485-A (RS-485) loads to ensure compatibility with both standards.
The ICs are offered in commercial, industrial and automotive versions, supporting operating temperature ranges of 0°C to 70°C, -40°C to 85°C, and -40°C to 125°C, respectively. The LTC2876 is available in a RoHS compliant 8-pin 3 x 3 mm DFN or MSOP package, while the LTC2877 includes a logic supply and is available in a RoHS compliant 10-pin 3 x 3 mm DFN or MSOP package.
Wi-Fi 6/BLE module enables rapid development Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the WE310K6, a fully integrated, low-power module featuring dual-band, dual-stream Wi-Fi 6, and dual-mode Bluetooth/BLE.
Read more...Low phase noise amplifier RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The MAAL-011158 from Macom is an easy-to-use low-phase noise amplifier that provides 12 dB of gain in a 32-lead QFN plastic package.
Read more...Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Analysis of switch-mode power supply: inductor violations Altron Arrow
Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.
Read more...Microsoft Windows IoT on ARM Altron Arrow
Computer/Embedded Technology
This expansion means that the Windows IoT ecosystem can now harness the power of ARM processors, known for their energy efficiency and versatility.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.