Alliance Memory introduced a new monolithic high-speed, low-voltage CMOS double data rate 3 synchronous DRAM (DDR3L SDRAM) with an 8 Gb density in the 78-ball, 9 x 13,2 mm, lead-free FBGA package.
Delivering increased power efficiency for high-end computer and storage systems, the 1 G x 8 AS4C1G8MD3L offers a double data rate architecture for extremely fast transfer rates of up to 1600 Mbps/pin and clock rates of 800 MHz.
The chip’s transfer rates are twice as fast as DDR and DDR2 SDRAMs, providing higher bandwidth for newer-generation microprocessors in industrial, medical, networking, telecom and aerospace applications. The SDRAM operates from a single 1,35 V power supply and is backwards-compatible with 1,5 V power supplies to enable large memory subsystems. The device is a logical choice for customers that require increased memory yet face board space constraints.
The AS4C1G8MD3L is available with an extended commercial temperature range of 0°C to +95°C (AS4C1G8MD3L-12BCN). Internally configured as eight banks of 1 G x 8 bits, the device features a fast 64 ms, 8192-cycle refresh from 0°C to +85°C and 32 ms from +85°C to +95°C.
The SDRAM offers fully synchronous operation and provides programmable read or write burst lengths of 4 or 8. An auto precharge function provides a self-timed row precharge initiated at the end of the burst sequence. Easy-to-use refresh functions include auto- or self-refresh, and a programmable mode register allows the system to choose the most suitable modes to maximise performance.
In addition to the 1 G x 8 AS4C1G8MD3L, Alliance Memory also offers the 512M x 16 AS4C512M16D3L in the 96-ball FBGA package, which is available in an extended commercial temperature range (AS4C512M16D3L-12BCN) and an industrial temperature range from -40°C to +95°C (AS4C512M16D3L-12BIN).
Alliance Memory is one of the few suppliers of monolithic DDR3L SDRAMs with high densities to 8 Gb. In addition, with minimal die shrinks, the single-die AS4C1G8MD3L provides a reliable drop-in, pin-for-pin-compatible replacement for a number of similar solutions – eliminating the need for costly redesigns and part requalification.
Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Battery-friendly Thread and BLE solution iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...Next generation HMI processing platform Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...240 W in compact form factor Brabek
Power Electronics / Power Management
The cost-effective and reliable RECOM RACPRO1-S240E DIN-rail mount AC-DC series is only 125 x 139 mm and 39 mm wide, yet provides 240 W output.
Read more...Low-power SoC for IoT designs iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...Chip for high-density power Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...GigaDevice expands GD25UF Series density NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...ARINC 429 line driver evaluation board ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...Highly integrated 24-channel mixed signal IC EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version