Circuit & System Protection


High-voltage surge stopper

22 February 2017 Circuit & System Protection

The LTC7860 from Linear Technology is a high-efficiency surge stopper that protects loads from high-voltage transients. During an input over-voltage event, such as a load dump in vehicles, the device controls the gate of an external MOSFET to act as a switching DC-DC regulator. This operation regulates the output voltage to a safe level, allowing the loads to operate through the event.

During normal operation, the LTC7860 turns on the external MOSFET continuously, passing the input voltage through to the output. An internal comparator limits the voltage across the current sense resistor and regulates the maximum output current to protect against over-current faults.

An adjustable timer limits the time that the IC can spend in over-voltage or over-current regulation. When the timer expires, the external MOSFET is turned off until the LTC7860 restarts after a cool-down period. By strictly limiting the time in protective PWM mode when the power loss is high, the components and thermal design can be optimised for normal operation and safely operate through high-voltage input surges and/or over-current faults. An additional PMOS can be added for reverse battery protection.

For more information contact Conrad Coetzee, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected], www.arrow.altech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
EMI shielding materials application guide
Circuit & System Protection
TE Connectivity’s shielding solutions include electrically conductive elastomers, gaskets, knitted wire mesh, oriented wire, EMI shielding ventilation panels, shielded window, cable shielding and shielding components.

Read more...
Exploring Bluetooth Channel Sounding
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP has enabled BCS on the MCX W72 multi-protocol wireless MCU, which supports Bluetooth Low Energy 6.0, Thread, Zigbee, and Matter.

Read more...
Dual-band Wi-Fi 6 companion module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The SimpleLink Wi-Fi CC33xx family of devices from Texas Instruments are dual-band Wi-Fi 6 companion modules enabling engineers to connect more applications with confidence.

Read more...
Power module enhances AI data centre power density
Altron Arrow Power Electronics / Power Management
Microchip’s MCPF1525 power module with PMBus delivers 25 A DC-DC power and is stackable up to 200 A.

Read more...
High-performance linear regulator
Altron Arrow Power Electronics / Power Management
The TI TPS7A57-Q1 is an automotive-grade, high-performance low-dropout linear regulator, engineered for precision power delivery in noise-sensitive systems.

Read more...
Clearing the Static: ESD containers and packaging
Actum Circuit & System Protection
         Vacuum forming ESD Electronic components can be damaged by electrostatic discharges. To protect against such damage, electronic assembly parts are often transported or stored in vacuum formed component ...

Read more...
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.

Read more...
Collaboration to explore 10BASE-T1S SPE
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The collaboration between Microchip and Hyundai aims to evaluate and promote the adoption of advanced in-vehicle network technologies leveraging each company’s strengths.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved