Telecoms, Datacoms, Wireless, IoT


NB-IoT antennas

10 October 2018 Telecoms, Datacoms, Wireless, IoT

Taoglas has launched three NB-IoT antennas, including a compact ceramic NB-IoT antenna and an ultra-thin, flexible multiband antenna that supports all LTE bands.

The low-profile, highly efficient NCP.5820 is a ceramic surface mount multiband antenna that supports bands 8 (880 – 960 MHz) and 20 (791 - 862 MHz), as well as band 5 (824 – 894 MHz) to allow IoT devices – such as asset trackers – to work across different regions and different carriers. Its low profile (2 mm) and small footprint (14,1 x 8,3 mm) make it the smallest NB-IoT antenna, according to Taoglas.

The NCP.5820 is designed with the patent-pending Taoglas Boost technology, which delivers up to a 2 dB improvement in antenna performance when integrated into small devices. Taoglas Boost is particularly suited to designs with shorter ground planes, allowing IoT and other device designers to bring to market a wider range of smaller devices that would otherwise not have been able to meet certain stringent carrier certification requirements.

The NCS.5820 is a surface-mount onboard antenna that supports bands 5, 8 and 20. Its low profile (1,6 mm) and small footprint

(11 x 20 mm) allow it to be integrated into even the smallest of IoT devices. As it is a larger antenna, it demonstrates higher efficiency, and Taoglas Boost is also available with this antenna, and any Taoglas onboard antenna.

The third antenna in the Extensis range is the patent-pending FXUB64 flexible ultra-wideband antenna, which has been designed for all working frequencies in the 600 to 3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM and AGPS, including LTE band 71. The ultra-thin polymer antenna is delivered with a flexible peel-and-stick body with excellent efficiencies on all bands.

For more information contact Andrew Hutton, RF Design, +27 21 555 8400, [email protected], www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Full sensor to cloud solution
CST Electronics Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.

Read more...
Long-range Wi-Fi HaLow module
TRX Electronics Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.

Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.

Read more...
SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...
SiP supports LTE/NB-IoT and GNSS
RF Design DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.

Read more...
Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...
Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...