Analogue, Mixed Signal, LSI


Clock oscillators with ultra-low jitter

27 February 2002 Analogue, Mixed Signal, LSI

High-speed applications such as networks and instrumentation require very stable, high-frequency reference clocks. The EG2001 series from Epson satisfies this need for frequencies between 106 and 166 MHz. It utilises a high-stability quartz SAW technology, oscillating in the fundamental mode; clock jitter is typically 3 ps RMS or 30 ps peak-to-peak with maximum noise rejection. These CMOS devices operate at 3,3 V and long-term stability is excellent at ±100 ppm over 10 years. The package dimensions are minimal, 7,0 x 5,0 x 1,2 mm.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

u-blox’ smallest ever GNSS module
RF Design Analogue, Mixed Signal, LSI
Designing an anomaly detection library with AI learning capability is possible with minimal data and with no specific data-science skills needed.

Read more...
Evaluation board for MEMS accelerometers
Altron Arrow Analogue, Mixed Signal, LSI
The board is designed to facilitate fast system prototyping and device evaluation of MEMS devices in ST’s ASM330LHHX product family.

Read more...
Efficient cold chain management with high-accuracy temperature sensors
Analogue, Mixed Signal, LSI
Choosing the correct system of temperature sensing in cold chain management is vital to ensure quality and product safety for the consumer.

Read more...
Tiny CO2 sensor employs photoacoustic spectroscopy
TRX Electronics Analogue, Mixed Signal, LSI
The device uses a high-sensitivity MEMS microphone to detect the pressure change generated by CO2 molecules within the sensor cavity.

Read more...
Self-learning AI sensor for fitness tracking
TRX Electronics Analogue, Mixed Signal, LSI
The Bosch BHI260AP is ideal for always-on sensor applications like wrist wearables, hearables, smartphones, AR/VR headsets and controller device.

Read more...
Sensor nodes for reliable air quality data
TRX Electronics Analogue, Mixed Signal, LSI
The advanced sensors offer easy integration, fully calibrated outputs with a digital interface, and optimal measurement of vital air quality parameters.

Read more...
High-resolution magnetic position sensor
TRX Electronics Analogue, Mixed Signal, LSI
Featuring a 14-bit sensor array and analog front-end, the sensor uses a differential measurement method to compensate for external stray magnetic fields.

Read more...
Absolute pressure sensor
Altron Arrow Analogue, Mixed Signal, LSI
The sensing element, which detects absolute pressure, consists of a suspended membrane manufactured using a special process developed by STMicroelectronics.

Read more...
2- and 4-output fanout clock buffers
Altron Arrow Analogue, Mixed Signal, LSI
Both devices support 2,5/3,3 V power supplies with separate input and output supply voltages for level shifting.

Read more...
Rad-hard DAC for next-gen satellites
Altron Arrow Analogue, Mixed Signal, LSI
The STMicroelectronics RHRDAC121 radiation-hardened digital-to-analog converter (DAC) operates down to 2,5 V for use in modern, low-power system designs that older 3,3 V parts cannot support. Consuming ...

Read more...