Passive Components


Small buzzers come taped

27 February 2002 Passive Components

"Offering the smallest buzzers in the world means we can deliver them in tape and reel for automatic placement and processing." So says Murata, adding that these sounders can offer a major improvement in productivity for high-volume producers of PDAs, palm PCs, smartcard terminals, etc without any reduction in sound pressure level (SPL).

The company's PKMC16E has a 16 mm by 16 mm footprint and is packaged in trays. The new PKLCS1212E is 12 mm x 12 mm (an area reduction of 44%) and taped on reels of 1000 pieces. Both have a minimum SPL of 75 dB. These buzzers can be reflow soldered with Au terminals eliminating the need for lead and making conductive adhesive-mounting viable.

Piezo buzzers use less current than dynamic versions and produce no magnetic disturbance. SPL is specified at 4 kHz, with a 3 V peak-to-peak square wave at 10 cm, and the operating temperature range is -20°C to 70°C.

Avnet Kopp

011 444 2333

[email protected]

www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Surface-mount resettable fuses
Electrocomp Passive Components
The new series of fuses, suitable for overcurrent and thermal protection, expand the hold current up to 6 A and the maximum voltage to 33 V DC.

Read more...
New compact SMT chokes for low-voltage applications
Future Electronics Passive Components
TDK has released three new B8272 series of compact EPCOS SMT common-mode chokes specially developed for DC/DC converters and low-voltage applications.

Read more...
Electrocomp stocks PhaseCap Energy Plus capacitor
Electrocomp Passive Components
TDK Electronics’ new PhaseCap Energy Plus series capacitor is the latest generation of capacitor for power factor correction.

Read more...
Multilayer ferrite beads
Electrocomp Passive Components
As direct replacements for the discontinued BMB series, TE Connectivity’s BMC multilayer ferrite beads cover a wide range of impedance characteristics.

Read more...
High-voltage power inductors
RF Design Passive Components
Coilcraft’s RFC0807BV Series power inductors are a high-voltage version of the RFC0807B Series. Their operating voltage is rated at 800 V, which is higher than comparable products in the market. They ...

Read more...
Power inductors with very low DC and AC losses
RF Design Passive Components
Coilcraft’s new XGL6020 low-profile moulded power inductors offer the company’s lowest DC losses and extremely low AC losses for a wide range of DC-DC converters.  Additional performance benefits include ...

Read more...
Dual-port PoE++ transformer
Electrocomp Passive Components
Bourns’ Magnetics product division is introducing the new Model SM13143EL dual-port LAN 10/100/1000 Base-T PoE++ transformer for Ethernet applications. This part is IEEE 802.3bt Type 3 (also known as ...

Read more...
Single-layer RF capacitors
RF Design Passive Components
The V80 Series of single-layer capacitors from Knowles Precision Devices have a capacitance value of 100 nF. They are designed for DC blocking or RF bypass applications in a broad frequency range. These ...

Read more...
Air-core RF inductors
RF Design Passive Components
The 111SQ from Coilcraft is a square air-core inductor series with a remarkably high quality factor of up to 200 at 400 MHz. The parts come in a range of inductances from 27 µH to 47 µH and have a self-resonant ...

Read more...
Capacitors for DC blocking and RF bypass applications
RF Design Passive Components
The V80 Series of single-layer capacitors from Knowles Precision Devices have a capacitance value of 100 nF and have been designed for DC blocking or RF bypass applications across a broad frequency range. ...

Read more...