Power Electronics / Power Management


DIN rail power supply

30 January 2019 Power Electronics / Power Management

Accutronics announced that it has been formally appointed as the exclusive representative of TDK-Lambda and its entire range of products for the South African territory. Together with this announcement, Accutronics has launched the new TDK-Lambda DRF960 24 1, a DIN-rail mounting AC-DC power supply rated at 24 V / 40 A (960 W) with a 60 A (1 440 W) peak for 4 seconds.

The product has a very narrow 110 mm width, freeing additional space for other DIN-rail mount assemblies. With an efficiency of 95%, significantly less internal heat is generated, resulting in cooler electrolytic capacitors. Operating field life is calculated at greater than 10 years at 75% load, 40°C ambient and 230 V a.c. input. This energy efficient power supply is suitable for a wide range of industrial applications including factory automation, process control and test and measurement equipment.

The 24 V output is adjustable from 24 to 28 V, using the front panel potentiometer or an external 5 to 6 V d.c. source, to compensate for blocking diodes or FETs in redundant configurations. Also provided as standard is a DC OK relay contact rated at 30 V / 1 A, and remote on/off functionality. Power consumption is less than 1 W to reduce energy consumption when the output is inhibited. Up to five units can be connected together in parallel when set in droop mode current share.

The DRF960 is housed in a robust metal enclosure, measuring 123,4 mm in height, 139 mm deep and a width of just 110 mm. The power supply can operate from a wide-range 180 – 264 V a.c., 47 – 63 Hz input. Input to output isolation is 3000 V a.c., input to ground isolation is 1500 V a.c., and output to ground isolation is 500 V a.c. The unit is rated for operation in -25°C to +70°C ambient temperatures (40°C cold start), derating linearly above 60°C to 50% load at 70°C.

The unit is safety certified to IEC/EN/UL/CSA 60950-1, UL 508 and is CE marked for the Low Voltage, EMC and RoHS Directives. It meets EN 55032-B radiated and conducted emissions, and complies with the EN 61000-4 immunity standards.

For more information contact Tobie Muller, Accutronics, +27 11 782 8728, [email protected], www.accutronics.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Schneider Electric partners with Drakenstein Municipality
Schneider Electric South Africa Power Electronics / Power Management
Drakenstein Municipality, situated in Paarl in the Western Cape, is one of the first distribution utilities globally to implement Schneider Electric’s green, SF6-free RM AirSeT switchgear with pure air technology and native digital connectivity.

Read more...
E-Mobility: navigate safety, interoperability and conformance
Concilium Technologies Power Electronics / Power Management
Although the concept of electric vehicles is not a new one, the market remains in its infancy, and is not well-regulated or fully operational. This presents a number of challenges for manufacturers throughout the EV and EVSE ecosystem.

Read more...
Webinar: Decarbonise with industrial drives
Power Electronics / Power Management
Infineon's TRENCHSTOP IGBT7 and CoolSiC technologies increase the efficiency of your industrial drive design, ultimately resulting in cost savings for you, and a more sustainable future for all.

Read more...
Analysis of switch-mode power supply: inductor violations
Altron Arrow Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.

Read more...
Compact PCB-mount SMPS
RS South Africa Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.

Read more...
AC-DC brick PSU
Conical Technologies Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.

Read more...
5 kW switching PSU range
Conical Technologies Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.

Read more...
Reliable charging range
Current Automation Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.

Read more...
Microchip expands its mSiC solutions
EBV Electrolink Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.

Read more...
Dual-port USB-C power delivery solution
Altron Arrow Power Electronics / Power Management
Infineon’s CYPD7272-68LQXQ is the tray packing option of the company’s dual-port USB-C power delivery solution and features an integrated dual-port USB-C PD + DC-DC controller.

Read more...