Interconnection


'Eurostyle' terminal blocks meet power density requirements

13 March 2002 Interconnection

Designed to meet the requirements of high-power board connections, the 91 and 92 series Eurostyle terminal blocks from Molex offers industry-leading power density. With advancements in IGBT technology and increasingly dense, large backplanes, the 91 and 92 series terminal blocks are used in AC motor drive controls, electrical inverters and soft motor starters.

Available in two to 16 circuits, the 91 series have 10,2 mm terminal spacing, accept up to 6 AWG and are field service rated at 600 V for 40 and 60 A depending upon configurations. The 92 series may be ordered in two to 12 circuits, have terminals on 15 mm spacing and are field service rated at a maximum of 600 V for 90 A with the use of 3 AWG wire. The 92 series accommodates up to a 3 AWG size maximum.

Featuring extended wire entry funnel that surrounds the wire insulator, the products eliminate exposed wire strands and possible shorting. These fixed terminal blocks use a rising cage pressure clamp that compresses wires uniformly and offers a secure, reliable contact. Combination slotted and posi-drive screw heads improve transmission of torque and wire retention. Strategic spacing between all conductive components meet the 600 V UL 1059 requirement and the 800 V requirement of IEC 947-1 pollution degree 3. In addition, multiple PCB terminals distribute power, reducing 'hot spots'.

For greater reliability and security, the insulator has a 94 V-O high flammability rating and uses leading edge polyamide polymer with a 130°C temperature service rating. All Molex Eurostyle products meet UL 1059, UL 508-C, IEC 947-1 and IEC 1010 standards.

Avnet Kopp

011 444 2333

[email protected]

www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

What’s the big deal with open pin fields?
Spectrum Concepts Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.

Read more...
New connector for Push-X technology
Phoenix Contact Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm2.

Read more...
Test cable designed for maximum ruggedness
Conical Technologies Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.

Read more...
Safe connection under load
Phoenix Contact Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.

Read more...
Time-To-Market interconnect solutions
Interconnection
TTM Technologies are at the forefront of electrified powertrains, vehicle charging stations, and energy storage solutions, providing thermal management, high-current capabilities, and specialised solutions.

Read more...
Connectors for energy storage systems
Phoenix Contact Interconnection
The new Phoenix Contact BPC series connectors are protected against polarity reversal making them ideally suited for use in energy storage systems.

Read more...
What’s the big deal with open pin fields?
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.

Read more...
mBend cable assemblies
Conical Technologies Interconnection
The mBend cable assemblies from Anoison are designed to meet the growing demand for low-profile coaxial connections in applications where space is limited, and precise bending is necessary right next to the connectors.

Read more...
Configurable DIN rail housings
Wiltron Agencies Interconnection
With PTR HARTMANN’s INS265 design kit, DIN rail housings can be individually configured using a wide range of options.

Read more...