Analogue, Mixed Signal, LSI


Voltage-output octal DACs

13 March 2002 Analogue, Mixed Signal, LSI

Analog Devices has introduced a family of octal 8, 10 and 12-bit buffered voltage-output digital-to-analog converters (DACs) that operate from a single 2,5- to 5,5 V power supply and consume only 1,4 mA at 3 V. Rail-to-rail outputs provide maximum headroom and dynamic range in low-voltage, single supply applications. The 8-bit AD5308, 10-bit AD5318 and 12-bit AD5328 have a three-wire serial interface that operates at clock rates up to 30 MHz. Integrating eight DACs on one chip, these converters are designed for space-constrained applications. Power-down feature reduces the current consumption to 400 nA at 5 V (120 nA at 3 V). Each of the eight DAC channels can be individually powered-down for flexible and incremental power management. Data is entered as a

16-bit word consisting of one control bit, three address bits, and 12 data bits. The AD53x8 family operates from -40 to 105°C and is available in 16-lead TSSOP package.

Analog Data Products SA, 011 531 1400





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
Industrial vibration sensing simplified
Altron Arrow Analogue, Mixed Signal, LSI
The IIS3DWBG1 from STMicroelectronics is a high performance, three-axis digital vibration sensor engineered for demanding industrial applications where accurate motion monitoring is essential.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...
Compact Schottky diodes increase efficiency
RS South Africa Analogue, Mixed Signal, LSI
Gen 3 SiC Schottky diodes from Vishay in the compact SlimSMA HV package increase efficiency while enhancing electrical insulation.

Read more...
Silanna launches Plural ADC EVKs
Analogue, Mixed Signal, LSI
Silanna Semiconductor has released its first evaluation kits for the Plural data converter family to offer the fastest, most cost-effective way to evaluate and deploy high-performance ADCs.

Read more...
High speed, low noise 2 A driver
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM8423-2A from SGMICRO is a high efficiency, class AB, low distortion power line driver optimised to accept a signal from a Power Line Carrier modem.

Read more...
Online sensor technology hub
Analogue, Mixed Signal, LSI
Mouser’s sensor content hub offers an extensive collection of articles, blogs, eBooks, and product information from its technical experts and leading manufacturing partners.

Read more...
Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...
BT Audio 4 Click board
Dizzy Enterprises Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved