27 March 2019
Power Electronics / Power Management
The main feature of the primary switched module PM-IP67A200 developed by MTM Power is its design suitable for applications with protection degree IP67. It is specifically designed for the electrical supply of control, sensor and actuating systems in the field directly at the application.
The power supplies of this series allow use as a ‘plug and play’ solution directly on-site. This is possible due to the connection via special 7/8" connectors and the thermoselective vacuum encapsulation developed by MTM.
The units are available with 24 V single and dual output voltages, and are certified according to the standards UL 60 950-1 and UL 508. They have a 90 - 264 V a.c. and 100 - 300 V d.c. input range, and are designed for worldwide use under extreme environmental conditions in on-machine applications.
As an option, units with 24 V output are also available with variable current limiting designed to allow a short increase of the output power to 150%. This function, known as power boost, allows application on motors, capacitive loads, etc. which exhibit difficult startup characteristics.
The outputs of the dual-output version are galvanically separated with 500 V a.c. isolation voltage and independently regulated. The devices are according to protection degree 1 and comply with the Low Voltage Directive as well with the up-to-date EMC standards as regards CE conformity. They are constantly short circuit protected, need no ground load, and operate within a temperature range of -25°C to +60°C.
Schneider Electric partners with Drakenstein Municipality Schneider Electric South Africa
Power Electronics / Power Management
Drakenstein Municipality, situated in Paarl in the Western Cape, is one of the first distribution utilities globally to implement Schneider Electric’s green, SF6-free RM AirSeT switchgear with pure air technology and native digital connectivity.
Read more...E-Mobility: navigate safety, interoperability and conformance Concilium Technologies
Power Electronics / Power Management
Although the concept of electric vehicles is not a new one, the market remains in its infancy, and is not well-regulated or fully operational. This presents a number of challenges for manufacturers throughout the EV and EVSE ecosystem.
Read more...Webinar: Decarbonise with industrial drives
Power Electronics / Power Management
Infineon's TRENCHSTOP IGBT7 and CoolSiC technologies increase the efficiency of your industrial drive design, ultimately resulting in cost savings for you, and a more sustainable future for all.
Read more...Analysis of switch-mode power supply: inductor violations Altron Arrow
Editor's Choice Power Electronics / Power Management
Common switch-mode power supply (SMPS) design errors are discussed, and their appropriate rectification is specified, with details on complications that arise with the power stage design of DC-DC switching regulators.
Read more...High-speed AWG generates up to 20 sine waves Vepac Electronics
Test & Measurement
Spectrum Instrumentation has released a new firmware option for its range of versatile 16-bit Arbitrary Waveform Generators, with sampling rates up to 1,25 GS/s and bandwidths up to 400 MHz.
Read more...Compact PCB-mount SMPS RS South Africa
Power Electronics / Power Management
Traco Power’s 5W PCB-mount switch mode power supply (SMPS) offers high efficiency, and is well suited for a variety of applications in the automation, electronics, electrical and mechanical industries.
Read more...AC-DC brick PSU Conical Technologies
Power Electronics / Power Management
These PSUs have a typical efficiency of up to 92%, and a power factor value of up to 0,99. They are available in 12, 24, 28, 48 and 54 V output versions.
Read more...5 kW switching PSU range Conical Technologies
Power Electronics / Power Management
Mornsun has released a new switching power supply range, the LMF5000-25Bxx, which has a 5000 W capacity, and features universal AC input configurations.
Read more...Reliable charging range Current Automation
Power Electronics / Power Management
Whether you’re powering essential electronics, keeping emergency equipment operational, or maintaining the performance of critical machinery, the need for dependable charging solutions cannot be overstated.
Read more...Microchip expands its mSiC solutions EBV Electrolink
Power Electronics / Power Management
The highly integrated 3,3 kV XIFM plug-and-play digital gate driver is designed to work out-of-the-box with high-voltage SiC-based power modules to simplify and speed system integration.
printer friendly version