Passive Components


Low-profile, high-current inductors

27 March 2002 Passive Components

Vishay Dale's IHLP-2525CZ-01 and IHLP-5050CE-01 inductors have a height profile as low as 3,0 mm which enables thinner, lighter electronic products. Low losses at frequencies up to 5 MHz help extend battery life and low DCR values and high current capabilities provide superior electrical performance.

These inductors combine high current and low DCR values with low saturation in a device featuring a very low profile - 6,5 x 6,7 x 3,0 mm. Standard inductance options range from 0,10 µH to 4,7 µH in the IHLP-2525CZ-01 and from 0,47 µH to 5,6 µH in the IHLP-5050CE-01. Inductance tolerance for both devices is ±20% with an inductance drop of less than 10% at full rated current. Maximum DC resistance (DCR) ranges from 1,7 mOhm to 40 mOhm for the IHLP-2525CZ-01 and from 2 mOhm to 18 mOhm at 100 kHz for the IHLP-5050CE-01, while current ratings range from 3,9 A to 22 A for standard values and up to 48 A for special values.

Avnet Kopp

011 444 2333

[email protected]

www.avnet.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

PCB connectors for power systems
Phoenix Contact Passive Components
With the new PC 6 PCB connectors with screw connection, Phoenix Contact’s classic connection technology is available with enhanced touch protection for the new pin connector pattern.

Read more...
Polymer caps with very high ripple current capability
RS South Africa Passive Components
TDK Corporation has released the B40910 series of hybrid polymer capacitors, which can handle up to 4,6 A at 100 kHz and 125°C.

Read more...
SPE connector range
Phoenix Contact Passive Components
Single Pair Ethernet (SPE) is a communication technology that realises Industry 4.0 and IIoT applications, and Phoenix Contact’s Combicon range are ideal for SPE connections.

Read more...
TDK expands MLCC series
RS South Africa Passive Components
TDK Corporation has expanded its CGA series of multilayer ceramic capacitors, currently being the highest capacitance in 100 V products for automotive applications.

Read more...
Inductor supports temperatures up to 150°C
RS South Africa Passive Components
TDK has launched a highly durable inductor for automotive A2B applications that supports a wide temperature range of -55 up to 150°C.

Read more...
Long-range passive infrared motion sensor
Future Electronics Passive Components
Panasonic Industry (PaPIRs) recently introduced he world’s most compact long-range passive infrared motion sensor, for installation heights of up to 15 metres.

Read more...
Isolated solid state relay
Altron Arrow Passive Components
The ISO808, ISO808-1 (PowerSO-36) and ISO808Q, ISO808Q-1 (TFQFPN32) are galvanic isolated eight-channel drivers featuring a low supply current.

Read more...
Low-profile power inductors
RS South Africa Passive Components
TDK Corporation has announced the introduction of its new PLEA85 series of high-efficiency power inductors developed for battery-powered wearables and other devices.

Read more...
Miniature capacitor for automotive applications
Avnet Abacus Passive Components
Murata has released its LLC series of multi-layer ceramic capacitors for automotive applications, that feature a reversed termination for low ESL.

Read more...
Sealed tantalum capacitors
Electrocomp Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.

Read more...