|
|
|
Power supply interface for bus systems
27 March 2002, Interconnection
Bus systems now constitute an integral part of computers and automation equipment. They make available the standardised interface to which components and subsystems can be connected in any combination. Many of the components are now connected to the bus board by the solderless press-fit technique (DIN IEC 352).
For connecting up power supply lines Erni offers components using its Ernipress technology. These two-row power supply interfaces have five pins per row with a compliant press-fit zone, the length of which depends on the thickness of the PCB. For the power supply lines there is a choice of termination between cable lugs for M4 screw and Faston shoes. The Faston terminals have a cross-section of 6,3 x 0,8 x 0,08 mm in accordance with DIN 46244. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Vent panels for increased airflow and EMI protection
26 June 2019, Actum Electronics, Circuit & System Protection
Vent panels made by Laird Technologies offer effective ventilation within electronic equipment, while upholding signal integrity of the enclosure. Its MaxAir and ElectroVent solutions consist of layered, ...
- Compression lugs and splices
26 June 2019, TRX Electronics, Interconnection
Panduit Pan-Lug compression connectors provide permanent terminations for a variety of power and grounding applications.
The connectors are designed for use with many different code and flex conductor ...
- Test point pins
26 June 2019, Vepac Electronics, Interconnection
The range of terminal pins available from Vero Technologies provide an easily useable fitting on a through-hole printed circuit board (PCB) for the attachment of oscilloscope probes, multimeter leads ...
- Pin strips for KNX applications
26 June 2019, Wiltron Agencies, Interconnection
The pins of the STL190 through-hole pin strips were designed by PTR specifically for KNX applications in home, building and system technology. Positioned by means of a carrier pad at a spacing clearance ...
- High-temperature FFC/FPC connectors
26 June 2019, Otto Marketing, Interconnection
Hirose Electric’s new FH52K series of robust flat flexible cable/flat printed circuit (FFC/FPC) connectors are designed to withstand higher operating temperatures than standard FFC/FPC connectors. The ...
- Modular fibre-optic patch panel
26 June 2019, Webb Industries, Interconnection
The latest from Webb Industries is Telegärtner’s Fibre Termination Box (FTB) – a modular fibre-optic patch panel system which facilitates customised cabling in locations where large numbers of apartments ...
- Actum acquires Band-It business in South Africa
29 May 2019, Actum Electronics, News
The Actum Group has acquired Banding and Identification Solutions Africa (BISA), the leading distributor of Band-It clamping and fastening products in South Africa. The transaction, which was finalised ...
- High-speed M12 connectors for transportation
29 May 2019, Webb Industries, Interconnection
Telegärtner’s range of connectors for railway and vehicle applications has been expanded with the introduction of a new product series. An add-on to the previous M12 connector series, the new series contains ...
- Board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
A new product series of robust board-to-board connectors from Phoenix Contact includes shielded connectors with a pitch of 0,8 mm and unshielded versions with a pitch of 1,27 mm.
The Fine Pitch series ...
- Durable board-to-board connector
29 May 2019, Otto Marketing, Interconnection
Hirose Electric has developed a high contact reliability connector with a -40°C to 140°C operating temperature that maintains high performance in vibration environments, including on-board powertrain.
While ...
- Coax-to-PCB connectors
29 May 2019, TRX Electronics, Interconnection
Amphenol SV Microwave’s high-speed RF/coaxial solderless edge launch connectors are ideal for high-frequency printed circuit board applications where precision is key. These rugged and durable interconnects ...
- Wire-/board-to-board connectors
29 May 2019, TRX Electronics, Interconnection
Minitek is Amphenol ICC's brand for board-to-board and wire/cable-to-board connectors in 2,00 mm pitch. It is a fully modular system enabling all types of connections between printed circuit boards, wires ...
|
|
