|
|
0,6 mm pitch connectors
27 March 2002, Interconnection
Harwin is launching a new range of surface mount ultra-fine pitch connectors. The MP6 connectors are suitable for use in notebook computers, PDA, games machines, telecommunications, office automation equipment and for internal mounting where miniaturisation and lightweight are paramount.
The 0,6 mm pitch board mounting connectors provide stacking heights of 3 mm, 4 mm and 5 mm between boards. They are available with up to 100 contact positions, are polarised to prevent mis-mating, and equipped with locating pegs for accurate PCB placement. Metal latching clips are available upon request if additional strain relief is required.
The housings are manufactured from glass-filled LCP in a natural colour and have UL94V-0 flammability rating. The housing has a minimum insulation resistance of 100 MW and a dielectric withstanding voltage of 200 V a.c. Male and female contacts are manufactured from brass and phosphor bronze respectively, with a selective gold/tin finish. Contacts will carry up to 0,5 A and have a maximum contact resistance of 70 mOhm. These connectors have a -40 to +80°C operating temp range. |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- RF coaxial IDC connectors
28 August 2019, Future Electronics, Interconnection
AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
- Sealed plastic connectors
28 August 2019, TRX Electronics, Interconnection
The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
- Balancing performance, speed and cost for rugged interconnects
25 September 2019, Avnet South Africa, Interconnection
System designers want the smallest and lightest possible connectors for use in aerospace and military electronics, while industrial and transportation electronics are expected to deal with the same harsh environments at more competitive cost points.
- Indoor LoRaWAN gateway
25 September 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT
The LPS8 from Dragino Technology is an open-source LoRaWAN gateway that lets the user bridge a LoRa wireless network to an IP network via Wi-Fi or Ethernet. The gateway’s LoRa wireless technology allows ...
- Minimising power consumption for external Flash
25 September 2019, Altron Arrow, DSP, Micros & Memory
With any low-power design, the designer has the choice between choosing low-power components or switching off the power to peripheral devices. When considering the choice of non-volatile Flash memories, ...
- Flexible digital power-factor controller
25 September 2019, Altron Arrow, Power Electronics / Power Management
Combining the flexibility of digital power with the responsiveness of analog algorithms, STMicroelectronics’ STNRGPF12 dual-channel interleaved boost-PFC (power factor correction) controller is easily ...
- Sealed plastic connectors
25 September 2019, TRX Electronics, Interconnection
The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
- LoRa temperature and humidity sensor
25 September 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT
The Dragino LHT65 temperature and humidity sensor is a Long Range (LoRa)-enabled device with an external connector to connect to external sensors such as a temperature sensor, soil moisture sensor, tilting ...
- Connector module for 4PPoE
25 September 2019, Webb Industries, Interconnection
Webb Industries has introduced the new AMJ-S Module 2G from Telegärtner, optimised and redesigned to provide demanding applications with operational reliability under extreme mechanical and electrical ...
- Managing the IoT on an energy budget
28 August 2019, Altron Arrow, Telecoms, Datacoms, Wireless, IoT, DSP, Micros & Memory
Historically, users wanted MCUs because they could process data and solve problems faster than a human could. MCUs also help make products more convenient and consistent in behaviour. The microcontroller ...
- Accelerometer with high-accuracy temperature sensor
28 August 2019, Altron Arrow, Analogue, Mixed Signal, LSI
The STMicroelectronics LIS2DTW12 combines a MEMS 3-axis accelerometer and a temperature sensor on a single die for use in space-constrained and battery-sensitive detectors such as shipping trackers, wearables ...
- Pressure and temperature sensor
28 August 2019, Altron Arrow, Analogue, Mixed Signal, LSI
The MS5837-02BA pressure sensor module from TE Connectivity is an ultra-small, gel-filled pressure sensor optimised for both altimeter and barometer applications. Designed for consumer devices such as ...
|
|
