PCMCIA and Compact Flash interfaces
10 April 2002
Interconnection
Samtec has introduced new headers and sockets for card-to-board applications where PCMCIA or Compact Flash compatibility is required.
For PCMCIA compatibility, the PCMT/PCMS Series header and socket is available with 68 pins in the same hot pluggable polarisation configurations as the PCMCIA specification. The header is designed to accept card lengths of 13, 25 and 38 mm and either 0,80 mm boards or 1,60 mm boards. For Compact Flash compatibility, the CFT/CFS Series is available with 50 pins in the same hot pluggable polarisation configurations as the Compact Flash specification. The header is designed to accept a 25 mm card length and either 0,80 mm boards or 1,60 mm boards. Both systems are available with standard and elevated profiles.
Unique Samtec solder locks provide alignment of the headers to the board and additional mechanical strength after soldering.
Spectrum Concepts, 011 395 3184
Further reading:
Meeting the demands of mmWave with Samtec high-performance RF solutions
Spectrum Concepts
Interconnection
[Sponsored] The appetite of modern technology for ever-higher data rates and transmission speeds seems to be insatiable, and this is especially apparent in the drive towards mmWave technologies.
Read more...
Robust series of vertical-mating battery connectors
Electrocomp
Interconnection
KYOCERA AVX has further expanded its industry-leading selection of standard battery connectors with the introduction of the new 9155-900 Series 2,5 mm-pitch vertical-mate battery connectors.
Read more...
High current and voltage interconnect
Hiconnex
Interconnection
The 972 series interconnect from Glenair ensures peak performance for the latest specification requirements in high-current, high-voltage, and high-frequency commercial aircraft applications.
Read more...
M12 panel mount connectors
Communica
Interconnection
Binder, a specialist in industrial circular connectors, offers a particularly wide range of M12 panel mount connectors that cover a wide variety of connection types, materials, and fastening solutions.
Read more...
Blade terminals deliver greater power density
Spectrum Concepts
Interconnection
[Sponsored] Connectivity has become more important as designers pack more power into smaller spaces, all while managing thermal loads and ensuring efficiency.
Read more...
What’s the big deal with open pin fields?
Spectrum Concepts
Interconnection
The concept behind the open pin field array is that it provides many contacts that are not limited to a single role.
Read more...
Hirose Electric’s push-on bayonet lock connectors
Avnet Abacus
Interconnection
Hirose Electric’s HR22K Series is a compact, waterproof, and oil-resistant connector designed for demanding industrial environments.
Read more...
New connector for Push-X technology
Phoenix Contact
Interconnection
Phoenix Contact is extending the series of PCB connectors with innovative Push-X technology to include a new connector for conductor cross-sections up to 2,5 mm
2.
Read more...
Test cable designed for maximum ruggedness
Conical Technologies
Interconnection
The Anoison PT test cable is designed for maximum ruggedness using a high-quality raw cable, connector, and smart armouring module.
Read more...
Safe connection under load
Phoenix Contact
Interconnection
The ArcZero DC connectors from Phoenix Contact can be safely connected and disconnected under load, providing operators with reliable protection against hazardous electric arcs.
Read more...
printer friendly version