2,7 Gbps amp with AGC

24 April 2002 Analogue, Mixed Signal, LSI

Maxim designed the MAX3861 low-power amplifier with automatic gain control (AGC) specifically for WDM transmission systems using optical amplifiers. On a single +3,3 V supply this amplifier linearly amplifies or attenuates the input signal to a fixed output voltage swing in a fully differential approach. Both the input and output are on-chip terminated to match 50y lines. This AGC amplifier accepts differential or single-ended current-mode logic (CML) input data at rates up to 2,7 Gbps. Differential output swing can be adjusted between 400 mV to 920 mV over

46 dB input range. Variation in output swing is controlled to within 0,5 dB over a 16 dB input variation. The device provides an RSSI that is linear within 5% for input signal levels up to 100 mV pk-to-pk and a loss-of-signal (LOS) indicator with programmable threshold. The MAX3861 is available in 24-pin QFN package with exposed pad. Operates over -40 to +85°C.

CST Electronics, 011 452 0706

Further reading:

IMU with dual-sensing capability
EBV Electrolink Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.

Read more...

---

Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.

Read more...

---

Precision JFET op-amp
Altron Arrow Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.

Read more...

---

A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...

---

High voltage instrument op-amp
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.

Read more...

---

High-speed SAR ADC simplifies design
Altron Arrow Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.

Read more...

---

2-wire quad voltage output DAC
Altron Arrow Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.

Read more...

---

Dual-channel ADC for RF applications
RFiber Solutions Analogue, Mixed Signal, LSI
The ARF0471 from Advanced RF is a dual-channel, 14-bit, 3 GSPS ADC, which features an on-chip buffer and sample-and-hold circuit.

Read more...

---

Infineon launches Edge Ai software solution
Altron Arrow Analogue, Mixed Signal, LSI
Infineon has introduced DEEPCRAFT, a new software solution category brand for Edge AI and machine learning, after the company recognised the huge potential of Edge AI for the market.

Read more...

---

16-bit voltage output denseDAC
Altron Arrow Analogue, Mixed Signal, LSI
The AD5766 uses a versatile four-wire serial interface that operates at clock rates of up to 50 MHz for write mode, and is compatible with SPI, QSPI, MICROWIRE, and DSP interface standards.

Read more...

---