Secure transmission of information on data highways requires special security measures, because today more and more high performance data transmission at high speeds is required. Designed for these requirements are Erni's new shielded connectors to DIN 41612/IEC 603-2 and ANSI/VITA Standard for VME 64. ANSI/VITA 1-1994 Version approved April 10, 1995. This version has 32 shielded contacts and 96 signal contacts plus the main advantages of a very low return loss, low crosstalk and very low insertion loss.
The shield type C on a Eurocard with a pitch of N x 2,54 mm uses the standard PC Board hole pattern. Erni shielded connectors are mateble with standard (DIN 41612/IEC 603-2) type C connectors.
Main features:
* Excellent ground path via the continuous shield on each face of the board connector.
* Low insertion and retention forces - special shielded contact design.
* ESD protection - early make/last break of 1,0 mm for the shielding contacts.
* No mismating - the shielding frame prealigns the connectors before mating.
* Nondetachable shielding frame for the male connector.
* Economical assembly of the female connector (solderless Erni press-fit contacts).
* The male connector is fitted with solder pin contacts.
* The termination cross-sections allow PCB hole diameter to IEC specification.
Designing with PCIe Spectrum Concepts
Editor's Choice Interconnection
PCI Express has become the backbone of modern high-performance systems with each new generation promising higher bandwidth, but that performance comes with a cost.
Read more...Connectivity solutions for hydrogen technologies Hiconnex
Interconnection
As the production distribution and utilisation of hydrogen continue to scale, connectivity becomes a key enabler for efficient energy transmission, data communication, and system control.
Read more...Robust single-pole power connectivity Hiconnex
Interconnection
Designed for cable-to-cable and cable-to-equipment use, Radiall’s single-pole power connector support current ratings from 250 A to 750 A and operating voltages up to 1000 V AC or DC.
Read more...M12 push-pull connectors IOT Electronics
Interconnection
Phoenix Contact’s M12 push-pull connectors with internal locking set a new benchmark for fast, secure, and space-saving connectivity in industrial automation.
Read more...Versatile outdoor waterproof connectors Vepac Electronics
Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.
Read more...Comprehensive range of data connectors IOT Electronics
Interconnection
Phoenix Contact’s comprehensive range of data connectors provides reliable connection solutions for modern networked applications across industrial, infrastructure, and commercial environments.
Read more...Compact inline connector for aerospace Hiconnex
Interconnection
Radiall’s Small Inline Connector series is a fully qualified wire-to-wire solution designed to simplify harness creation, installation, and modification in aerospace applications.
Read more...Compact hybrid power storage connector IOT Electronics
Interconnection
Phoenix Contact has introduced a new hybrid connector for electrical energy storage systems, designed to combine power, signal, and data transmission in a single, compact interface.
Read more...MIL-spec connector series Future Electronics
Interconnection
The MIL-HD2 connector series from Amphenol is the company’s next-generation, SOSA-aligned solution engineered to meet the most demanding requirements of modern military embedded systems.
Read more...DC connectors approved for 2000 V IOT Electronics
Interconnection
Phoneix Contact’s Sunclix DC connectors are now approved for system voltages of up to 2000 V in accordance with TÜV Rheinland’s new test specification, opening the door to higher-voltage PV designs and reduced system costs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version