Dow-Key Microwave, the manufacturer of electromechanical coaxial and waveguide switches, switch matrices and related passive components, has introduced the re-configurable CANBus-based integrated switch matrix, equipped with a built-in Ethernet port.
This switch matrix is based on the well-established standard design of the SP8T switch with internal termination. Access to the termination port via SMA connectors enables it to be used as a building block for redundancy solutions, allowing insertion of multiple redundant units into any determined subset of the eight main network lines. Dual-use technology is implemented with focus on the wireless market needs, especially in the area of satellite ground stations and wireless networking solutions.
The 9D8-420822T performs up to 26 GHz. This Ethernet (802.3)-based switch matrix can be easily accessed from anywhere in the world via TCP/IP protocols on 10BaseT networks. The switch can be also controlled using the CANBus interface. Characteristics include 11-14 V d.c (12 V d.c. nominal), operating current is 750 mA typical. Equipped with a self cut-off latching actuator, the device switches in 60 ms (max).
Each unit is supplied with contactless indicator circuitry that monitors the movement of the RF contact actuators using photosensors. Available options include external 2 WCW 50 W terminations installed on all termination ports. Various models cover frequencies from DC to 26 GHz.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...SiP supports LTE/NB-IoT and GNSS RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Introducing SIMCom’s new A7673X series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
printer friendly version