CAN network are now found in widely varying types of automotive and industrial systems, calling for a range of different CAN capabilities and scalable MCU core performance. ST Microelectronics offers a family of five different CAN interfaces (pCAN, beCAN, bxDAN, FullCAN and cCAN) and a range of MCU capabilities with 8 to 32-bit data width.
pCAN:(Passive CAN) supports the 2,0B passive protocol. It has three transmit/receive mailboxes and two message identifier filters, two interrupt vectors and supports low power mode.
beCAN:(Basic-enhanced) supports the 2,0B active protocol. It has two prioritised transmit mailboxes and one receive FIFO up to four messages deep for realtime performance. Four scalable and configurable filters handle all message filtering by hardware to minimise CPU load. beCAN is ideal for medium-complexity car body and car radio systems.
bxCAN:(Basic-extended) has the beCAN features plus three transmit mailboxes, two independent receive FIFOs and eight filters. It is optimised for high-end car body and low-end gateway applications.
FullCAN: Is compatible with the Intel 82527 CAN controller. It has 14 transmit/receive mailboxes, one receive FIFO and two 29-bit identifier filters. FullCAN is ideal for engine management systems.
cCAN: Is one of the new generation of full CAN implementations. It has 32 transmit/receive mailboxes allowing a large number of messages to be handled statically and autonomously. Its receive mailboxes support FIFO mode. Each mailbox has its own associated filter. cCAN is ideal for high-end gateway and power train applications.
STs CAN MCU families extend through the 8-bit ST7 family; the 8/16-bit ST9 family; the 16-bit ST10 family; and the 32-bit MCU family.
Microchip enhances digital signal controller lineup Future Electronics
DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.
Read more...MCX C Series development board Avnet Silica
DSP, Micros & Memory
The FRDM-MCXC444 is a compact and scalable development board for rapid prototyping of MCX C444 MCU from NXP Semiconductors.
Read more...Redefining entry-level MCUs NuVision Electronics
DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.
Read more...Low-profile tantalum chip capacitors Electrocomp
Passive Components
These general-purpose tantalum capacitors from Kyocera AVX are available in multiple case sizes with low profile options.
Read more...Compact high-performance antennas Electrocomp
Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.
Read more...Microchip enhances TrustMANAGER platform Altron Arrow
DSP, Micros & Memory
Firmware over-the-air updates and remote cryptographic key management provide scalable solutions for addressing IoT security challenges.
Read more...MCU for low-power, IoT applications NuVision Electronics
DSP, Micros & Memory
Silicon Labs recently announced the PG26, a general-purpose microcontroller with a dedicated matrix vector processor to enhance AI/ML hardware accelerator speeds.
Read more...EEPROMs for industrial and military markets Vepac Electronics
DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.
Read more...PLCnext – Open, IIoT-ready industrial platform IOT Electronics
DSP, Micros & Memory
PLCnext can be used alongside an existing PLC system, collecting control system data via EtherNet/IP, PROFINET, or MODBUS, and can push this information to a cloud instance.
Read more...ICs vs modules: Understanding the technical trade-offs for IoT applications NuVision Electronics
Editor's Choice DSP, Micros & Memory
As the IoT continues to transform industries, design decisions around wireless connectivity components become increasingly complex with engineers often facing the dilemma of choosing between ICs and wireless modules for their IoT applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.