The STV2310 is a high-quality video front-end circuit designed to process worldwide PAL, NTSC and SECAM analog standards into digitised 4:2:2 YCrCb video format. This ST Microelectronics device provides a cost-effective solution for digital consumer applications, which still need analog video signal inputs while in the transition phase to full digital video. It also addresses a range of legacy issues, enabling consumers to buy new digital TVs without having to replace their older analog VCRs. Key features: ability to interface RGB and Fast Blanking (FB) from SCART plugs; ability to process analog YCrCb inputs with tint control, interfacing to DVD players, for example; high-quality video conversion using a 10-bit ADC to create an ITU-R BT.656 (YUV 4:2:2) digital output; horizontal scaling (zoom-in/zoom-out) including non-linear scaling for 4:3 to 16:9 conversion (panorama mode); complete set of fully-programmable registers always accessible via the I2C Bus interface; adaptative 4H/2D comb filter.
Antennas to meet all connectivity requirements Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...Stainless steel pushbutton enclosures Electrocomp
Enclosures, Racks, Cabinets & Panel Products
he HYPB series from Hammond is a hygienic type 4X stainless steel pushbutton enclosure designed for use in environments where regular high temperature, high-pressure washdowns are required.
Read more...SMD varistors with huge surge current capability Electrocomp
Power Electronics / Power Management
TDK Corporation has introduced two new varistor series in SMD design, the larger of the two capable of handling a surge current of 10 000 A.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Sealed tantalum capacitors Electrocomp
Passive Components
With an operating temperature range of -55 to 125°C, with voltage derating, these capacitors have been designed especially for avionics and aerospace applications.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...New series of chip-type capacitors Electrocomp
Passive Components
Panasonic Industries’ SMT capacitor series all benefit from the longest lifetime plus the lowest ESR values currently available.
Read more...Single-channel software configurable I/O Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...Current-sense amplifier with PWM rejection Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...SMD coupled inductors Electrocomp
Passive Components
TDK Corporation has expanded its family of flat wire inductors with the high-performance EPCOS ERUC23 coupled inductor series.
printer friendly version