-48 V telecom system supply monitor
28 August 2002
Analogue, Mixed Signal, LSI
Linear Technologies' LTC1921, plus three resistors, provide a complete precision dual -48 V battery voltage and fuse monitoring solution for high reliability telecom equipment in less than 20 mm2 of space.
The three separate alarm outputs drive three optocouplers or green LEDs. Should either of the -48 V supplies have an undervoltage (-38,5V ±1 Vmax) or overvoltage (-70 V ±1,5 Vmax) failure condition, the LTC1921 turns off one or more of the LEDs/optos to indicate the fault to a diagnostic system. During an undervoltage condition, the LED/opto is held off until the supply recovers to -43 V (±0,5 Vmax). In addition, if the voltage across either fuse exceeds 2,5 V, indicating a blown fuse, the device will turn off a third LED/opto. Because the -48 V supply is not always a benign environment, the LTC1921 has been design to withstand +100 V d.c. faults and 10 µs transients up to ±200 V.
The LTC1921 is offered in either an MSOP or SOIC 8-lead package specified for -40 to 85°C.
Further reading:
Dual-range IMU with edge processing
EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s innovative LSM6DSV80X combines two accelerometer structures for 16 g and 80 g full-scale sensing, a gyroscope up 4000 dps, and embedded intelligence in a single component.
Read more...
High-reliability isolation amplifiers
EBV Electrolink
Analogue, Mixed Signal, LSI
The VIA series of isolation amplifiers from Vishay are designed to deliver exceptional thermal stability and precise measurement capabilities.
Read more...
Mibbo QT2C Series signal isolators
Conical Technologies
Analogue, Mixed Signal, LSI
The Mibbo QT2C Series isolators support a rich combination of input and output signals, working with either current loops or voltage levels.
Read more...
IMU with dual-sensing capability
EBV Electrolink
Analogue, Mixed Signal, LSI
ST’s 6-axis inertial measurement unit integrates a dual accelerometer up to 320g and embedded AI for activity tracking and high-impact sensing.
Read more...
Plural data converter series
Analogue, Mixed Signal, LSI
Silanna Semiconductor has announced the launch of Plural, a new generation of data converters for customers eager to find a more available, affordable, high-performance alternative to existing brands.
Read more...
Precision JFET op-amp
Altron Arrow
Analogue, Mixed Signal, LSI
The specifications of the ADA4620 make it optimal as a front-end amplifier in a data-acquisition system, or for a TIA circuit with high input impedance.
Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...
High voltage instrument op-amp
iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...
High-speed SAR ADC simplifies design
Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...
2-wire quad voltage output DAC
Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
Read more...
printer friendly version