Circuit & System Protection


Eliminate audio cable noise

25 September 2002 Circuit & System Protection

New Murata technology creates three magnetically coupled common mode choke coils in one 2,5 and 2,0 mm chip. It is 1,2 mm high and contains no lead (Pb).

The increase in digital equipment with audio circuits creates the risk of high frequency noise from digital lines being radiated from headphone cables. Developed specifically to control sound crosstalk, distortion and radiated noise in stereo audio signal lines, this chip eliminates these problems.

New ceramic material avoids sound distortion that can be caused by conventional filters in which the impedance may change with the audio signal level. The new material is not sensitive to the signal level so distortion is not a problem (see graph).

Optimal internal and external electrode arrangements give high common and normal mode impedances. These suppress common and normal mode noise that would other-wise be radiated from the headphone cable.

Electrically, the DLM2HGN601S has common mode impedance of 600 Ohm ±25% and typical normal mode of 600 W. Rated current is 100 mA up to 16 V d.c. and DC resistance is 0,40 Ohm maximum. Insulation resistance is 100 MOhm minimum.

For more information contact Avnet Kopp, 011 809 6100, sales@avnet.co.za, www.avnet.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Coaxial RF surge protectors
23 October 2019, RF Design , Circuit & System Protection
Pasternack has launched a new series of coaxial surge protectors designed to protect valuable communications equipment from power surges and indirect lightning strikes. Pasternack’s new surge protectors ...

Read more...
Tiny buck-boost converters
25 November 2019, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced a family of four high-efficiency, low-quiescent-current (IQ) buck-boost converters that feature tiny packaging with minimal external components for a small solution size. ...

Read more...
Automotive-qualified TVS diodes
25 November 2019, Electrocomp , Circuit & System Protection
Bourns announced the release of the Model 15KPA-SD-Q transient voltage suppressor diode series. This series was designed for use in DC bus clamping applications and for the protection of sensitive electronic ...

Read more...
TVS array for display interfaces
25 November 2019, Altron Arrow , Circuit & System Protection
ProTek Devices has introduced a new steering diode transient voltage suppressor (TVS) array for circuit protection across popular consumer electronic display interfaces. The PUSB403 is ideal for USB 1.0, ...

Read more...
Ultra-small LDO linear regulator
25 November 2019, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced an ultra-low-power low-dropout (LDO) linear voltage regulator with what it claims is the industry’s lowest quiescent current (IQ) of sub-25 nA. The new regulator features ...

Read more...
Radiation-tolerant PolarFire FPGA
23 October 2019, Avnet South Africa , Programmable Logic
Developers of spacecraft electronics use radiation-tolerant (RT) field programmable gate arrays (FPGAs) to create on-board systems that meet the demanding performance needs of future space missions, survive ...

Read more...
Radiation-tolerant PolarFire FPGA
25 November 2019, Avnet South Africa , Programmable Logic
Developers of spacecraft electronics use radiation-tolerant (RT) field programmable gate arrays (FPGAs) to create on-board systems that meet the demanding performance needs of future space missions, survive ...

Read more...
Design considerations for powering remote Bluetooth beacons
25 November 2019, Avnet South Africa , Power Electronics / Power Management, Editor's Choice
One of the most exciting low-power wireless technologies to emerge in the last couple of years is Bluetooth beacon technology, which involves placing small electronic beacon devices at points of interest that broadcast packets of information via Bluetooth low energy to the smartphones of passers-by.

Read more...
Bluetooth 5.0 audio IC and module
25 November 2019, Avnet South Africa , Telecoms, Datacoms, Wireless, IoT
To help Bluetooth speaker and headphone manufacturers maintain product differentiation in the competitive wireless audio market, Microchip Technology released the next generation of its Bluetooth 5.0-qualified ...

Read more...
Battery charger for medical and personal electronics
25 November 2019, Avnet South Africa , Power Electronics / Power Management
Texas Instruments introduced a new switching battery charger IC that supports a termination current of 20 mA. Compared to competing devices, which typically support a termination current higher than 60 ...

Read more...