mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Miniature 10 A cable-to-cable connectors feature IP55/IP67 options
25 September 2002, Interconnection

Harwin's miniature cable-to-cable connectors measure just 12,5 x 6,7 x 29,0 mm mated yet can carry up to 10 A per contact. They also incorporate an 'O' ring seat in the housing design; allowing IP ratings of 55 and 67 to be achieved when combined with back-potting of the contact terminations. This makes them equally well suited to general-purpose applications and to those in harsh environments.

The 2 or 3-way connectors are available with a choice of 18 awg crimp or solder-bucket contact styles. Contacts are manufactured from tin-plated brass, whilst the female socket contacts use Harwin's proven 4-finger beryllium copper contact clip technology. Gold-plated contacts are available as an option.

Manufactured from grey polyester (UL94V-0 flammability rated), the housings are fully polarised to prevent mismating and include latching mechanisms for added strain-relief. Alternative housing colours are available to order.


Credit(s)
Supplied By: Vepac Electronics
Tel: +27 11 454 8053
Fax: +27 11 608 1661
Email: sales@vepac.co.za
www: www.vepac.co.za
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • RF coaxial IDC connectors
    28 August 2019, Future Electronics, Interconnection
    AVX has released new wire-to-board RF coaxial IDC connectors for industrial and automotive applications. The initial release of the new 00-6791 Series is comprised of two small, single-piece solutions ...
  • Sealed plastic connectors
    28 August 2019, TRX Electronics, Interconnection
    The UTL series from Souriau is a plastic connector suitable for outdoor industrial applications thanks to a high sealing performance (IP68/IP69K) and an extreme UV resistance with F1 material per UL746C. ...
  • Rugged DC-DC converters
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    XP Power introduced two new series of wide input-range chassis- and DIN-rail mount DC-DC converters that offer simple and rapid installation into a wide variety of industrial and ITE applications. The ...
  • 4-channel PC-based oscilloscope
    28 August 2019, Vepac Electronics, Test & Measurement
    The newly developed Model 1330 from Peaktech is a 4-channel PC oscilloscope with 100 MHz bandwidth and 1 GSps sample rate, which is suitable for mobile use on a laptop, and permanent installation in control ...
  • Digital fibre-optic sensor
    28 August 2019, Vepac Electronics, Opto-Electronics
    The DFS digital fibre-optic sensor series from Tri-Tronics is designed to provide reliable detection using plastic fibre-optic light guides. The slim-line housing with protective lid will fit in a variety ...
  • All-in-one light pipe system
    28 August 2019, Vepac Electronics, Opto-Electronics
    Bivar’s Zero Light Bleed adaptor technology, with built-in surface-mount LED, channels light directly to the lens, eliminating disruptive light bleed. The all-in-one adaptor system is built with optimum ...
  • Bidirectional laboratory power supply
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    EA Elektro-Automatik’s new 30 kW EA-PSB 10000 is a bidirectional power supply with a working efficiency of up to 96%, both as a source and as a drain with energy feedback. The device can be switched from ...
  • DC-DC converter for DIN-rail mounting
    28 August 2019, Vepac Electronics, Power Electronics / Power Management
    MTM Power is offering the HSD series of primary switched DIN-rail modules with DC input voltage. The devices offer an input voltage range of 20 - 72 V d.c. and allow efficient solutions for different ...
  • Waveguide to coax adaptors
    31 July 2019, RF Design, Interconnection
    Pasternack has launched a new series of waveguide to coax adapters for use in 5G, telecommunications, automotive radar, satellite communications, point-to-point radio, and terrestrial communications applications. The ...
  • SMT test points and terminal pins
    31 July 2019, Vepac Electronics, Interconnection
    Vero Technologies, a leading manufacturer of test points and terminal pins in the PTH (plated through-hole) space, has a complementary range of SMT devices suitable for use with high-speed placement machines. ...
  • DC UPS for DIN-rail mounting
    31 July 2019, Vepac Electronics, Power Electronics / Power Management
    The Effecta DCH series power supplies with UPS function are suitable for a variety of applications, and their robust IP 20 housing is applicable for all DIN-rail applications. With its power boost mode, ...
  • AC-DC power supplies for medical devices
    26 June 2019, Vepac Electronics, Power Electronics / Power Management
    XP Power has announced two new ranges of AC-DC power supplies that provide BF class insulation for healthcare applications where ehnanced EMC performance is a key requirement. The PBR500 and PBR650 ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.