Microchip has extended its serial EEPROM range with the first device to meet the VESA E-EDID 1.3 Standard and a new packaging option for low- and mid-density devices.
Supporting the VESA E-EDID 1.3 Standard for PC monitors, projectors and flat panel displays, the 24LC22A and 24LCS22A serial EEPROMs offer manufacturers simple, cost-effective alternatives for plug-and-play applications in high-end displays. With a 256 x 8-bit dual-mode serial EEPROM, the 24LC22A and 24LCS22A implement both DDC1 and DDC2 operating modes. The devices also support the new VESA E-EDID monitor specification for next-generation displays. Additional features include a 12C compatible 2-wire serial interface and a wide operating range of 2,5 V to 5,5 V.
These devices are packaged in standard 8-lead PDIP and SOIC. Microchip's 24LCXXB and 24AAXX series of serial EEPROMs now have an additional SOT-23 package option that is 72% smaller than 8-lead SOIC devices.
For more information contact Avnet Kopp, 011 809 6100; Memec SA, 021 674 4103; Tempe Technologies, 011 452 0530.
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.
Read more...Enhanced code protection for USB µC portfolio Future Electronics
DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.
Read more...General-purpose MCU with RISC-V architecture EBV Electrolink
DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.
Read more...8-bit MCU with I3C support Avnet Silica
DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.
Read more...An evolutionary step in customisable logic Altron Arrow
DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.
Read more...MCU for battery-powered applications Altron Arrow
DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.
Read more...Serial SRAM up to 4 MB EBV Electrolink
DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.
Read more...SiP supports LTE/NB-IoT and GNSS RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...Qi2 dsPIC33-based reference design
DSP, Micros & Memory
Powered by a single dsPIC33 Digital Signal Controller, the Qi2 reference design offers efficient control for optimised performance.
Read more...MIKROE’s IDE now includes MPLAB XC compilers
DSP, Micros & Memory
MIKROE has announced that the latest version of its multi-architectural IDE, NECTO Studio 6.1, now includes Microchip’s MPLAB XC compilers for 8-, 16- and 32-bit MCUs.
printer friendly version