Telecoms, Datacoms, Wireless, IoT


High-performance down-conversion mixer ICs

23 October 2002 Telecoms, Datacoms, Wireless, IoT

Atmel offers two active down-conversion mixer ICs for infrastructure, instrumentation and WLAN applications.

The devices are manufactured using its advanced Silicon Germanium (SiGe) process enabling maximum performance. Due to this, the company says that the T0780 and the T0781 are excellently suited for applications where performance is the key issue such as base transceiver stations (GSM, CDMA, UMTS).

The T0780 covers the 800 to 1000 MHz operating range, whereas the T0781 is designed for 1700 to 2300 MHz.

Most conventional mixers are passive solutions, which have a higher risk of spurious emissions. As the new T0780 and T0781 are active components, they provide a conversion gain between 10 to 11dB for drastic reduction of external influences. Moreover, they require only a low Local Oscillator (LO) input driving level (0 dBm), which helps to prevent spurious emissions.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Mobile satellite connectivity available in SA
Telecoms, Datacoms, Wireless, IoT
Space42 has commercially launched its next generation mobile satellite service, Thuraya 4 NGS, available in South Africa as of February 2026.

Read more...
Next-gen Wi Fi 6E connectivity for embedded systems
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.

Read more...
Quectel redefines connectivity with RG660Qx 5G Series
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.

Read more...
NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Contactless IO-Link couplers
IOT Electronics Telecoms, Datacoms, Wireless, IoT
The IO-Link couplers from Phoenix Contact are industrial contactless couplers designed to transmit power and IO-Link data across a small air gap without physical connectors.

Read more...
Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...
Multi-band GNSS patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.

Read more...
Cellular routers for explosive areas
Phoenix Contact Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.

Read more...
Power the next wave of IoT innovation
Links Field Networks Telecoms, Datacoms, Wireless, IoT
Links Field Networks’ portfolio includes connectivity platforms, edge devices, and network management tools designed to support secure, resilient IoT deployments across a range of use cases.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved