Family of universal line interface units support T1, E1 or J1

26 February 2003 Telecoms, Datacoms, Wireless, IoT Surveillance News & Events

Integrated Device Technology has introduced a complete family of universal line interface units (ULIUs), including octal, quad, dual and single densities. It is intended to enable designers to adopt a re-usable approach to line-card design by using a single board that is configurable through software and may be easily re-scaled to suit different T1, E1 or J1 port densities and loop lengths. The family of ULIU devices is an extension of the company's existing short-haul line interface units (LIUs).

Traditional long-haul applications apply to remote connection of business customers to the central office (CO), while short-haul applications typically apply to the interconnection of equipment within the same CO. Provision of a single, universal line termination, that can be configured for any protocol or loop length on a per port basis, allows T1, E1 or J1 equipment platforms to be used across multiple locations for connection of existing equipment to new packet switched networks.

The IDT ULIU devices target emerging line-card designs that are used in multi-service provisioning platforms, optical multiplexers, integrated multi-service access platforms, and broadband access equipment. While the IDT octal and quad ULIU devices support high-density equipment line-card applications, the dual and single ULIU products - in smaller packages and footprints - are designed for lower density line cards, access equipment and applications sensitive to single points of failure.

For more information contact Avnet Kopp, 011 809 6100, or Memec SA, 021 674 4103.

Further reading:

SMARTpod talks to Sophos and Phishield
SMART Security Solutions Technews Publishing Sophos Videos Information Security News & Events
SMARTpod recently spoke with Pieter Nel, Sales Director for SADC at Sophos, and Sarel Lamprecht, MD at Phishield, about ransomware and their new cyber insurance partnership.

Read more...

---

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...

---

Improving accuracy of outdoor devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
In a real-world environment, accessing a direct satellite signal is not always possible, and it cannot be relied upon as the only solution to provide a device with accurate location at all times.

Read more...

---

New 3dB hybrid couplers
Electrocomp Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.

Read more...

---

Next-level Software Defined Radio
IOT Electronics Telecoms, Datacoms, Wireless, IoT
Great Scott Gadgets has announced the HackRF Pro, a powerful evolution of its popular Software Defined Radio (SDR) platform designed for engineers and enthusiasts.

Read more...

---

High-performance Zigbee and BLE module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The KCMA32S from Quectel boasts an ARM Cortex-M33 processor with a frequency of up to 80 MHz, and supports Zigbee 3.0, BLE 5.3 and BLE mesh.

Read more...

---

Championing local PCB manufacturing
Master Circuits Telecoms, Datacoms, Wireless, IoT
Master Circuits, founded in 1994 by Peter Frankish in Durban, was born from the vision to meet the growing local demand for quick-turnaround printed circuit boards in South Africa.

Read more...

---

How IoT-driven smart data helps businesses stay ahead
Trinity IoT Telecoms, Datacoms, Wireless, IoT
With around 19 billion IoT devices globally, embedded in everything from machinery to vehicles to consumer products, reliable data is plentiful.

Read more...

---

IoT-optimised LTE Cat 1 bis module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel’s EG915K-EU is an LTE Cat 1 bis wireless communication module specially designed for M2M and IoT applications.

Read more...

---

Chip provides concurrent dual connectivity
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.

Read more...

---