Four-channel 16-bit SAR ADC said fast and affordable
12 March 2003
Analogue, Mixed Signal, LSI
The AD7655 is the newest member of Analog Devices' family of PulSAR high-performance successive approximation register (SAR) analog-to-digital converters (ADCs). Claimed to be low-priced, the AD7655 combines four 16-bit channels of the industry's fastest conversion into a low-profile 48-lead LQFP or LFCSP package.
For use in multichannel and multiplexed applications that demand accuracy, small package size, and low cost, the company says it guarantees a combination of specifications that, until now, was unavailable at this cost: four input channels, 1 MSPS sampling rate, 86 dB SNR at 100 kHz, single-supply operation, and a 0-5 V analog input range.
Two on-chip low-noise, wideband track-and-hold amplifiers, each preceded by a two-channel multiplexer, provide simultaneous sampling capability.
With no pipeline delay, this PulSAR ADC is suited for applications using multi-channel data acquisition, and zero-latency control loops in industrial process control, test and measurement and motor control systems. Power consumption scales with throughput rate.
For more information contact Analog Data Products SA, 011 259 9400.
Further reading:
High-speed PIN diode
Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...
Analogue front end for sensor measurements
Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
Read more...
Single-channel software configurable I/O
Altron Arrow
Analogue, Mixed Signal, LSI
These use cases of the AD74115H include analogue output and input, digital output and input, resistance temperature detector (RTD), and thermocouple measurement capability.
Read more...
Current-sense amplifier with PWM rejection
Altron Arrow
Analogue, Mixed Signal, LSI
Analog Devices’ AD8410A is a high voltage, high bandwidth current-sense amplifier that features an initial gain of 20 V/V and a 2,2 MHz bandwidth.
Read more...
Combining a LPF and ADC driver for a 20 Vp-p signal
Altron Arrow
Analogue, Mixed Signal, LSI
A mixed-signal ADC driver circuit’s optimum performance depends on multiple variables: the driver’s settling time, the RC filter’s time constant, driving impedance, and the ADC sampling capacitor’s kickback current, all interact during acquisition time and contribute towards sampling errors.
Read more...
Pressure sensor with NextNav certification
EBV Electrolink
Analogue, Mixed Signal, LSI
STMicroelectronics’ LPS22DF pressure sensor has received a NextNav certification, which guarantees performance and reliability for geolocation and other types of applications.
Read more...
Reference design for Raspberry Pi analogue I/O
Analogue, Mixed Signal, LSI
Analogue Devices has published a reference design for ±10 V analogue input and ±15 V analogue output for Raspberry Pi platforms.
Read more...
Multi-zone distance sensor with 90° field of view
Avnet Silica
Analogue, Mixed Signal, LSI
STMicroelectronics has revealed a new FlightSense multi-zone distance sensor, with 90° field of view, to bring lifelike situational awareness to applications like home automation, computers, robots, and smart equipment.
Read more...
Six-axis IMU with Qvar sensing channel
Altron Arrow
Analogue, Mixed Signal, LSI
The LSM6DSV16X from STMicroelectronics is a high-performance, low-power six-axis IMU, featuring a three-axis digital accelerometer and a three-axis digital gyroscope.
Read more...
Bidirectional current-sense amplifier with PWM
RS South Africa
Analogue, Mixed Signal, LSI
The MAX49925 from Analogue Devices is a bidirectional current-sense amplifier (CSA) with an input common-mode range that extends from -40 to 76 V, making it suitable for 48 V HEV applications where there are large automotive transients.
Read more...
printer friendly version