Analogue, Mixed Signal, LSI


Angle sensor with integrated wake-up angle detection

23 June 2021 Analogue, Mixed Signal, LSI

The MA782 detects the absolute angular position of a permanent magnet (typically a diametrically magnetised cylinder on a rotating shaft). With its power-cycling ability, the Monolithic Power Systems sensor is optimised for applications requiring low average power. The timing can be controlled by an on-chip clock or by an external controller. Flags are available for detecting a definable amount of angle change.

Supporting a wide range of magnetic field strengths and spatial configurations, both end-of-shaft and off-axis (side-shaft) mounting configurations are supported. The MA782 features magnetic field strength detection with programmable thresholds to allow sensing of the magnet position relative to the sensor, for functions such as the sensing of axial movements or for diagnostics.

The on-chip non-volatile memory (NVM) provides storage for configuration parameters, including the reference zero-angle position, the power-cycling parameters, the filter window affecting the output resolution and the magnetic field detection thresholds. The MA782 is available in a QFN-14 (2 x 2 mm) package.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Digital isolators for I2C interfaces
Analogue, Mixed Signal, LSI
Würth Elektronik has expanded its range of digital isolators with 2-channel bidirectional isolators for I2C communication interfaces.

Read more...
Ultra-low-power smart metering
EBV Electrolink Analogue, Mixed Signal, LSI
ScioSense’s UFC23 sensor combines improved resolution and offset stability with ultra-low standby current, enabling high-end battery-powered water, heat, gas and leak detection meter designs.

Read more...
Industrial vibration sensing simplified
Altron Arrow Analogue, Mixed Signal, LSI
The IIS3DWBG1 from STMicroelectronics is a high performance, three-axis digital vibration sensor engineered for demanding industrial applications where accurate motion monitoring is essential.

Read more...
Understanding two key tools for cleaner serial data
Altron Arrow Editor's Choice Analogue, Mixed Signal, LSI
Understanding how pre-emphasis and equalisation works, and when to use one over the other, is critical when designing reliable high-speed systems.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
High-speed Flash for system-on-chip applications
NuVision Electronics DSP, Micros & Memory
GigaDevice unveiled the GD25NE series of dual-power supply SPI NOR Flash chips, designed specifically for 1,2 V SoC applications.

Read more...
High-performance µC series
NuVision Electronics Computer/Embedded Technology
GigaDevice has announced the official launch of the GD32F503/505 high-performance series of 32-bit general-purpose microcontrollers based on the Arm Cortex-M33 core.

Read more...
High power from DC to 6 GHz
NuVision Electronics Telecoms, Datacoms, Wireless, IoT
WAVEPIA’s latest GaN-on-SiC transistor, the WP2806015UH(S), delivers up to 15 W power from DC to 6 GHz at 28 V.

Read more...
High-density planar power for mission-critical systems
NuVision Electronics Power Electronics / Power Management
Vishay’s SGTPL-28 family of planar transformers offer 150 W of output power from a 28 V input forward-converter architecture.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved