Reliable connectors from Southwest Microwave, used in mission-critical applications since 1989, address low-loss challenges and meet NASA/ESA outgassing requirements. The company offers space screening, qualification testing and DPA assistance. And all parts are traceable to their raw materials for single-lot control.
For applications requiring board-to-board spacing as tight as 3 mm, the SuperMini range is designed for signals from DC up to 67 GHz, with low mating//unmating forces for smooth bore and detent and the connectors accommodate misalignment of up to 0,254 mm axial and +/-10° radial with no performance degradation.
Also available are SSBP coax contacts for multi-pin, DC to 110 GHz designs which allow for mixing of microwave and signal contacts in one connector. These push-on coax contacts simplify interconnections and cabling while offering greater system reliability than the alternative of mating a large array of standard coax connectors. These SSBP coax contacts were designed to fit into standard off-the-shelf MIL-DLT-38999 and MIL-DTL-24308 D-Sub connectors and are interchangeable with standard signal contacts (available with 20 HD, 20, 16, 12 and eight contacts) to accommodate a variety of performance requirements.
Designing with PCIe Spectrum Concepts
Editor's Choice Interconnection
PCI Express has become the backbone of modern high-performance systems with each new generation promising higher bandwidth, but that performance comes with a cost.
Read more...Connectivity solutions for hydrogen technologies Hiconnex
Interconnection
As the production distribution and utilisation of hydrogen continue to scale, connectivity becomes a key enabler for efficient energy transmission, data communication, and system control.
Read more...Robust single-pole power connectivity Hiconnex
Interconnection
Designed for cable-to-cable and cable-to-equipment use, Radiall’s single-pole power connector support current ratings from 250 A to 750 A and operating voltages up to 1000 V AC or DC.
Read more...M12 push-pull connectors IOT Electronics
Interconnection
Phoenix Contact’s M12 push-pull connectors with internal locking set a new benchmark for fast, secure, and space-saving connectivity in industrial automation.
Read more...Versatile outdoor waterproof connectors Vepac Electronics
Interconnection
The LP-20 outdoor waterproof connector series offers a versatile range of rugged, circular connectors with 2, 3, 4, 5, 7, 8, 9, 12 and 14-pin configurations.
Read more...Comprehensive range of data connectors IOT Electronics
Interconnection
Phoenix Contact’s comprehensive range of data connectors provides reliable connection solutions for modern networked applications across industrial, infrastructure, and commercial environments.
Read more...Compact inline connector for aerospace Hiconnex
Interconnection
Radiall’s Small Inline Connector series is a fully qualified wire-to-wire solution designed to simplify harness creation, installation, and modification in aerospace applications.
Read more...Compact hybrid power storage connector IOT Electronics
Interconnection
Phoenix Contact has introduced a new hybrid connector for electrical energy storage systems, designed to combine power, signal, and data transmission in a single, compact interface.
Read more...MIL-spec connector series Future Electronics
Interconnection
The MIL-HD2 connector series from Amphenol is the company’s next-generation, SOSA-aligned solution engineered to meet the most demanding requirements of modern military embedded systems.
Read more...DC connectors approved for 2000 V IOT Electronics
Interconnection
Phoneix Contact’s Sunclix DC connectors are now approved for system voltages of up to 2000 V in accordance with TÜV Rheinland’s new test specification, opening the door to higher-voltage PV designs and reduced system costs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version