The Lab-Flex T series from Smiths Interconnect are phase-stable cable assemblies that operate up to 50 GHz. They are designed to be low-loss, high-frequency cables that have minimal phase change over changing temperature and flexure.
The phase response of these cable assemblies near room temperature is virtually flat and the phase over flexure response is extremely stable as well. These cable assemblies are made with a special foam fluoropolymer insulation and use a temperature-stable foam dielectric to minimise phase deviation over a wide temperature range. They provide shielding of more than 100 dB and have a velocity of propagation of 80%. These cable assemblies are an ideal choice for any application requiring consistency in the signal timing.
The cables, which have a standard length of 91 cm, have an impedance of 50 Ω and a temperature rating of -65 to 165°C. The flexible cable has a shielding effectiveness of >100 dB/ft.
The Lab-Flex T Series cable assemblies go through extensive qualification testing to validate rigorous application requirements. They are available with SMA/SMPM/SMP/2,4/2,92 mm connector options and are suitable for use in radar, test & measurement, space, GEO/MEO/LEO, and small satellite applications.
Digital link 40x faster than broadband Internet Hiconnex
Interconnection
Axon’s AxoMach high-speed links were recently qualified by the European Space Agency to the ESCC 3409/001 standard, and are designed to transmit data at speeds of up to 40 Gbps for space applications.
Read more...Modular CAT7 inter-car-connection Hiconnex
Interconnection
These modular connectors are particularly suitable for harsh environments, and have a high resistance to industrial vibration and an IP67 protection rating.
Read more...Multi-channel cable assembly RFiber Solutions
Interconnection
Withwave’s Multi-Channel SMPM Cable Assemblies (WMCM Series) provide a wide range of multiple coax connectors and flexible cable assemblies, with a choice of 26,5, 40 and 50 GHz configurations.
Read more...Compact power relays Future Electronics
Interconnection
The new HE-R Series power relays by Panasonic Industry are PCB-mounted relays for easy board assembly, with both two- and four-pole contact arrangement options.
Read more...SiP supports LTE/NB-IoT and GNSS RF Design
DSP, Micros & Memory
The nRF9151 from Nordic Semiconductor is an integrated System-in-Package that supports LTE-M/NB-IoT, DECT NR+ and GNSS services.
Read more...Nordic expands nRF91 series RF Design
DSP, Micros & Memory
Nordic Semiconductor has announced the expansion of its nRF91 series cellular IoT devices with the introduction of the nRF9151 System-in-Package (SiP).
Read more...LEXI-R10 series cellular module RF Design
Telecoms, Datacoms, Wireless, IoT
The LEXI-R10 Series from u-blox are LTE Cat 1 bis modules that support multi-band LTE-FDD, and are designed for size-constrained devices.
Read more...High-density multicoax cable assembly RFiber Solutions
Interconnection
Withwave’s high speed and high-density Multicoax Cable Assemblies (WMX Series) provide a wide range of multiple coax connectors and flexible cable assemblies with a choice of 20, 40, 50, 67 or 110 GHz configurations.
Read more...Centralised distribution for M8 and M12 connectors Communica
Interconnection
Amphenol LTW’s distribution boxes facilitate efficient cable management, easy installation with pre-wired configuration, and provide a centralised distribution point for M8 and M12 connectors.
Read more...What is an RF connector? Spectrum Concepts
Editor's Choice Interconnection
If you look across the broader electromagnetic spectrum, the selection of the 3 kHz to 300 GHz frequency range for RF signals is a result of a balance between propagation characteristics, data transmission requirements, regulatory allocations, and the compatibility of electronic components and devices.
printer friendly version