MicroSys Electronics has announced a module built around NXP’s S32G3 vehicle network processor. Thanks to the NXP S32G3 processor, the MPX-S32G399A system-on-module (SoM) surpasses its NXP S32G2-based predecessor with 2,5 times more application processing performance and is therefore well suited to real-time mixed-critical safety applications.
Improvements include eight Arm Cortex-A53 cores instead of four, as well as four Cortex-M7 dual-core lock-step pairs instead of three. 4 GB of LPDDR4 RAM is soldered onto the SoM and up to 32 GB of eMMC non-volatile memory and 64 MB SPI flash can be specified.
The SoM offers native CAN interfaces as well as Ethernet support, including time-sensitive networking (TSN). In addition, there are 14 GPIOs, 12 ADC inputs, four FlexSPI, two UART, one USB and four I2C. A JTAG interface is included for debugging purposes.
Microsys is aiming the SoM at any market where functional safety standards are required, including railway technology, aviation, manufacturing robots, control and drive systems, data loggers, edge gateways and fail-safe programmable logic controllers.
Whilst OEM evaluation kits will be available this year, series production is scheduled for Q1 2023.
Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Battery-friendly Thread and BLE solution iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...Next generation HMI processing platform Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...Rugged edge processing for defence Rugged Interconnect Technologies
Edge Computing & IIoT
WOLF Advanced Technology’s Coyotes division focusses on designing and manufacturing compact open-systems architectures built on VNX plus, VPX, and custom form factors.
Read more...Low-power SoC for IoT designs iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...Chip for high-density power Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...GigaDevice expands GD25UF Series density NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...ARINC 429 line driver evaluation board ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...Highly integrated 24-channel mixed signal IC EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version