In order to maximise the service life of a linear guide and to keep the required drive energy low, it is important to reduce friction and wear as much as possible.
German manufacturer, igus, has now achieved a breakthrough in tribological plastics with iglidur E3. This newly developed sliding material has a friction coefficient that is up to 40% better and able to open up flexibility of design in linear technology.
“The drylin T miniature linear slide offers extremely smooth running and new design freedom thanks to the newly developed iglidur E3 sliding material. Depending on the operating point, this has a friction coefficient of around 0,16 and thus achieves up to 40% less friction compared to the igus standard materials, measured on hard-anodised aluminium, and even less compared to commercially available sliding materials. This also means that manual adjustment requires 40% lower displacement forces. This is an important step towards greater design freedom, as it enables us to expand design leeway for the first time,” says Stefan Niermann, head of igus’ linear and drive technology business unit.
The traditional 2:1 rule, which generally applies to linear plain bearings, states that the distance between the driving force and the fixed bearing should not be more than twice the bearing clearance. Otherwise, an uneven movement sequence could jam the system. The greater the distance between the drive and the guide bearing, the higher the wear and required drive force. igus has now extended this design rule to 3:1, so that the drive can be 50% further away without impairing linear guide movement. At the same time, the required drive forces are reduced by 40%, which means 40% energy savings in electrically driven applications.
The drylin T miniature guide is available in three sizes (09, 12, and 15) and can be used in such applications as laboratory and medical technology and tool building. It is proven to slide better without harmful lubricants, and the miniature linear carriage with the new iglidur E3 sliders offers the well-known advantages of igus motion plastics. The solid lubricants incorporated into the material of the high-performance plastics ensure low-noise operation, high resistance to dirt and no need for maintenance.
High-temperature closed-loop MEMS accelerometer RS South Africa
Analogue, Mixed Signal, LSI
This sensor from TDK is a high-temperature MEMS accelerometer with ±14 g input range and a digital interface for measurement while drilling applications.
Read more...Transporting and storing lithium-ion batteries
Enclosures, Racks, Cabinets & Panel Products
Lithium-ion batteries have become ubiquitous in modern life, but along with their benefits comes a serious challenge: these batteries pose fire and safety risks and are classified as dangerous goods for transport.
Read more...Non-contact safety door switch Omron Electronics
Enclosures, Racks, Cabinets & Panel Products
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, designed to enhance workplace safety and streamline machinery operations.
Read more...Easy installation panel mount assembly Future Electronics
Enclosures, Racks, Cabinets & Panel Products
NKK’s new easy installation Panel Mount Assembly (the BYB201-470) consists of a PCB, resistor, connector, and a straight PC adaptor.
Read more...Automotive power-over-coax inductor RS South Africa
Power Electronics / Power Management
TDK has launched the ADL8030VA, a high-performance inductor designed specifically for power-over-coaxial applications.
Read more...3-terminal filters for automotive applications RS South Africa
Power Electronics / Power Management
TDK has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4,7 µF.
Read more...Industrial Ethernet time sensitive networking switch RS South Africa
Telecoms, Datacoms, Wireless, IoT
The ADIN3310 and ADIN6310 are 3-port and 6-port Gigabit Ethernet time sensitive networking (TSN) switches with integrated security primarily designed for industrial Ethernet applications.
Read more...RF shield box to 12 GHz Vepac Electronics
Enclosures, Racks, Cabinets & Panel Products
The HDRF-1467-S from RF Electronics has a thick RF-absorbing foam that deadens standing waves and reflections to provide more than 100 dB of isolation.
Read more...Large capacitance MLCCs at 100 V RS South Africa
Passive Components
TDK Corporation has expanded its CGA series for automotive multilayer ceramic capacitors to 10 µF at 100 V in 3225 size.
Read more...Power-over-coax inductors RS South Africa
Passive Components
TDK has expanded the ADL3225VF series of wire-wound inductors for automotive power-over-coax (PoC).
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version