DSP, Micros & Memory


SPI NOR Flash to meet SoCs’ needs

26 April 2023 DSP, Micros & Memory

GigaDevice has introduced an SPI NOR Flash product to meet advanced SOCs’ need for ultra-low power and high performance.

The GD25UF products operate at a supply-voltage range of 1,14-1,26 V. This is ideal for devices built on advanced process nodes and operating at a core voltage of 1,2 V, as it provides for a simpler power system architecture, and for direct interfacing between the I/O pins of the SoC or processor and the GD25UF device.

In low-power mode at a frequency of up to 50 MHz, Active Read current can be as low as 0,4 mA. Deep power-down current of 0,1 µA makes the GD25UF ideal for any battery-powered or wearable application.

In Fast Read mode, these Flash devices operate at up to 120 MHz and achieve a data-transfer rate of up to 480 Mbps. In low EMI mode, operating at 60 MHz over a double transfer-rate (DTR) quad I/O interface, the GD25UF achieves the same data-transfer rate of 480 Mbps, while minimising clock-generated noise, an ideal feature for noise-sensitive wireless applications.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Unlock power efficiency with the new generation of ultra-low-power MCUs
DSP, Micros & Memory
STMicroelectronics has announced a one-hour webinar on its STM32U0, the company’s latest generation of entry-level, ultra-low-power MCUs.

Read more...
Using AMD HLS to supercharge your design performance
DSP, Micros & Memory
This workshop explores the power and capabilities of High-Level Synthesis (AMD Vitis HLS) to dramatically accelerate embedded software to hardware speeds.

Read more...
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.

Read more...
Enhanced code protection for USB µC portfolio
Future Electronics DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.

Read more...
General-purpose MCU with RISC-V architecture
EBV Electrolink DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.

Read more...
Hardware architectural options for artificial intelligence systems
NuVision Electronics Editor's Choice AI & ML
With smart sensors creating data at an ever-increasing rate, it is becoming exponentially more difficult to consume and make sense of the data to extract relevant insight. This is providing the impetus behind the rapidly developing field of artificial intelligence.

Read more...
8-bit MCU with I3C support
Avnet Silica DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...
MCU for battery-powered applications
Altron Arrow DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.

Read more...
Serial SRAM up to 4 MB
EBV Electrolink DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.

Read more...