Telecoms, Datacoms, Wireless, IoT


Providing clean and pure GNSS signals in a noisy RF world

31 May 2023 Telecoms, Datacoms, Wireless, IoT

Tallysman Wireless Inc. is excited to announce the dual-band low-profile HC871SXF to its industry-leading line of helical GNSS antennas. 

The dual-band GNSS HC871SXF helical antenna is designed for precise positioning, covering the GPS/QZSS-L1/L2, GLONASS-G1/G2, Galileo-E1, and BeiDou-B1 frequency bands, including the satellite-based augmentation system (SBAS) available in the region of operation: WAAS (North America), EGNOS (Europe), MSAS (Japan), or GAGAN (India).

The HC871SXF has a precision-tuned, high-accuracy helical element that provides an excellent axial ratio and operates without a ground plane. These features make the HC871SXF ideal for lightweight, unmanned aerial vehicle (UAV) navigation and a wide variety of precision applications.

The HC871SXF low-profile helical antenna is approximately 10 mm shorter than the HC871, but provides the same performance.

It is packaged in a very light (23 g) and compact form factor (34 mm wide by 54 mm high). The antenna base has a male SMA connector. To facilitate installation, the base also has two threaded inserts and an O-ring to waterproof the SMA connection. Tallysman provides support for installation, integration, and optimisation to ensure optimal antenna performance.

The HC871SXF antenna supports Tallysman’s eXtended Filtering (XF) technology. The radio frequency spectrum has become congested worldwide as many new LTE bands have been activated, with their signals or harmonic frequencies being able to affect GNSS antennas and receivers. In North America, the planned Ligado service, which will broadcast in the frequency range of 1526 to 1536 MHz, can affect GNSS signals. Similarly, new LTE signals in Europe (1452 to 1496 MHz) and Japan (1476 to 1511 MHz) can also affect GNSS signals. Tallysman’s XF technology mitigates all these signals.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Mobile satellite connectivity available in SA
Telecoms, Datacoms, Wireless, IoT
Space42 has commercially launched its next generation mobile satellite service, Thuraya 4 NGS, available in South Africa as of February 2026.

Read more...
Next-gen Wi Fi 6E connectivity for embedded systems
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.

Read more...
Quectel redefines connectivity with RG660Qx 5G Series
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.

Read more...
Contactless IO-Link couplers
IOT Electronics Telecoms, Datacoms, Wireless, IoT
The IO-Link couplers from Phoenix Contact are industrial contactless couplers designed to transmit power and IO-Link data across a small air gap without physical connectors.

Read more...
Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...
Multi-band GNSS patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.

Read more...
Cellular routers for explosive areas
Phoenix Contact Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.

Read more...
Power the next wave of IoT innovation
Links Field Networks Telecoms, Datacoms, Wireless, IoT
Links Field Networks’ portfolio includes connectivity platforms, edge devices, and network management tools designed to support secure, resilient IoT deployments across a range of use cases.

Read more...
Move to smart agriculture
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Designed for precision agriculture, the RAKwireless SensorHub is a modular, industrial-grade IoT platform that collects real-time environmental and soil data across farming operations.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved